| A review on pipeline corrosion, in-line inspection (ILI), and corrosion growth rate models HR Vanaei, A Eslami, A Egbewande International Journal of Pressure Vessels and Piping 149, 43-54, 2017 | 395 | 2017 |
| An overview on materials and techniques in 3D bioprinting toward biomedical application S Vanaei, MS Parizi, S Vanaei, F Salemizadehparizi, HR Vanaei Engineered Regeneration 2, 1-18, 2021 | 318 | 2021 |
| Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts HR Vanaei, K Raissi, M Deligant, M Shirinbayan, J Fitoussi, S Khelladi, ... Journal of Materials Science 55, 14677-14689, 2020 | 94 | 2020 |
| Influence of process parameters on thermal and mechanical properties of polylactic acid fabricated by fused filament fabrication HR Vanaei, M Shirinbayan, M Deligant, K Raissi, J Fitoussi, S Khelladi, ... Polymer Engineering & Science 60 (8), 1822-1831, 2020 | 88 | 2020 |
| 3D Bioprinting of Polycaprolactone-Based Scaffolds for Pulp-Dentin Regeneration: Investigation of Physicochemical and Biological Behavior Z Mousavi Nejad, A Zamanian, M Saeidifar, HR Vanaei, M Salar Amoli Polymers 13 (24), 4442, 2021 | 64 | 2021 |
| Experimental study of PLA thermal behavior during fused filament fabrication HR Vanaei, M Shirinbayan, SF Costa, FM Duarte, JA Covas, M Deligant, ... Journal of Applied Polymer Science 138 (4), 49747, 2021 | 61 | 2021 |
| 3D printed and conventional membranes—a review BG Thiam, A El Magri, HR Vanaei, S Vaudreuil Polymers 14 (5), 1023, 2022 | 59 | 2022 |
| In-process monitoring of temperature evolution during fused filament fabrication: A journey from numerical to experimental approaches HR Vanaei, M Shirinbayan, M Deligant, S Khelladi, A Tcharkhtchi Thermo 1 (3), 332-360, 2021 | 56 | 2021 |
| Multi-scale damage analysis and fatigue behavior of PLA manufactured by fused deposition modeling (FDM) HR Vanaei, M Shirinbayan, S Vanaei, J Fitoussi, S Khelladi, A Tcharkhtchi Rapid Prototyping Journal 27 (2), 371-378, 2021 | 55 | 2021 |
| Effects of laser power and hatch orientation on final properties of PA12 parts produced by selective laser sintering A El Magri, SE Bencaid, HR Vanaei, S Vaudreuil Polymers 14 (17), 3674, 2022 | 46 | 2022 |
| Numerical prediction for temperature profile of parts manufactured using fused filament fabrication HR Vanaei, S Khelladi, M Deligant, M Shirinbayan, A Tcharkhtchi Journal of Manufacturing Processes 76, 548-558, 2022 | 43 | 2022 |
| Synthesis characterization and highly protective efficiency of tetraglycidyloxy pentanal epoxy prepolymer as a potential corrosion inhibitor for mild steel in 1 M HCl medium R Hsissou, R Lachhab, A El Magri, S Echihi, HR Vanaei, M Galai, ... Polymers 14 (15), 3100, 2022 | 40 | 2022 |
| A comparative in‐process monitoring of temperature profile in fused filament fabrication HR Vanaei, M Deligant, M Shirinbayan, K Raissi, J Fitoussi, S Khelladi, ... Polymer Engineering & Science 61 (1), 68-76, 2021 | 39 | 2021 |
| Investigating the effect of printing conditions and annealing on the porosity and tensile behavior of 3D‐printed polyetherimide material in Z‐direction SE Ouassil, A El Magri, HR Vanaei, S Vaudreuil Journal of Applied Polymer Science, e53353, 2022 | 35 | 2022 |
| Numerical–experimental analysis toward the strain rate sensitivity of 3D-printed nylon reinforced by short carbon fiber HR Vanaei, AE Magri, MA Rastak, S Vanaei, S Vaudreuil, A Tcharkhtchi Materials 15 (24), 8722, 2022 | 26 | 2022 |
| Effects of power and laser speed on the mechanical properties of AlSi7Mg0. 6 manufactured by laser powder bed fusion S Vaudreuil, SE Bencaid, HR Vanaei, A El Magri Materials 15 (23), 8640, 2022 | 17 | 2022 |
| Roadmap: numerical-experimental investigation and optimization of 3D-printed parts using response surface methodology HR Vanaei, S Khelladi, A Tcharkhtchi Materials 15 (20), 7193, 2022 | 16 | 2022 |
| Towards an accurate aerodynamic performance analysis methodology of cross-flow fans RM Himeur, S Khelladi, MA Ait Chikh, HR Vanaei, I Belaidi, F Bakir Energies 15 (14), 5134, 2022 | 11 | 2022 |
| Etude et Modélisation de la rhéologie des polymères au cours du procédé FDM (Fabrication additive) HR Vanaei Paris, HESAM, 2021 | 3 | 2021 |
| 3D Bioprinting from Lab to Industry S Vanaei, S Vanaei, M Kanhonou, A Tcharkhtchi, HR Vanaei 3D Bioprinting from Lab to Industry, 475-491, 2024 | 2 | 2024 |
Abbas TcharkhtchiENSAMПотвърден имейл адрес: ensam.eu
