Mechanochemical synthesis of one-part alkali aluminosilicate hydraulic cement F Matalkah, L Xu, W Wu, P Soroushian Materials and Structures 50, 1-12, 2017 | 141 | 2017 |
Development of sandwich composites for building construction with locally available materials F Matalkah, H Bharadwaj, P Soroushian, W Wu, A Almalkawi, ... Construction and Building materials 147, 380-387, 2017 | 42 | 2017 |
Effects of citric acid on the rheology, hydration and strength development of alkali aluminosilicate cement L Xu, F Matalkah, P Soroushian, N Darsanasiri, S Hamadneh, W Wu Advances in Cement Research 30 (2), 75-82, 2018 | 23 | 2018 |
Preparation of one-part alkali-activated nickel slag binder using an optimal ball milling process X Wang, W Wu, L Zhang, L Fu, X Li Construction and Building Materials 322, 125902, 2022 | 22 | 2022 |
Effect of recycled coarse aggregates enhanced by CO2 on the mechanical properties of recycled aggregate concrete S Luo, W Wu, K Wu IOP Conference Series: Materials Science and Engineering 431 (10), 102006, 2018 | 19 | 2018 |
Influence of admixtures on rheological properties and heat of hydration of alkali aluminosilicate cement W Wu, F Matalkah, P Soroushian, A Almalkawi, X Wang, L Xu Advances in Cement Research 29 (9), 397-403, 2017 | 19 | 2017 |
The Effect of Activators on the Mechanical Properties and Microstructure of Alkali‐Activated Nickel Slag L Xu, X Wang, C Guan, W Wu, L Zhang Advances in Civil Engineering 2020 (1), 1764108, 2020 | 16 | 2020 |
The effect of slag and fly ash content on the properties of electric furnace nickel slag-based geopolymer used for repair materials D Zhang, X Wang, S Kang, G Cheng, W Wu Case Studies in Construction Materials 19, e02284, 2023 | 14 | 2023 |
Fluidized bed combustion coal fly ash: comparative evaluation for potential use in alkali-activated binders W Wu, F Matalkah, A Darsanasiri, P Soroushian International Journal of Coal Preparation and Utilization, 2022 | 14 | 2022 |
Effects of silicate modulus and alkali dosage on the performance of one-part electric furnace nickel slag-based geopolymer repair materials Y Shen, S Kang, G Cheng, J Wang, W Wu, X Wang, Y Zhao, Q Li Case Studies in Construction Materials 19, e02224, 2023 | 13 | 2023 |
Study on carbonation resistance and chloride ion distribution after carbonation of alkali-activated raw sea sand slag mortar W Wu, S Kang, X Wang, H Liu Case Studies in Construction Materials 19, e02649, 2023 | 10 | 2023 |
Characteristics of the alkali-silica reaction in seawater and sea sand concrete with different water-cement ratios W Wu, T Wang, Q Gong, K Zhang, X An, D Wang Construction and Building Materials 400, 132822, 2023 | 10 | 2023 |
Study on basic performance and drying shrinkage of binary solid waste geopolymer prepared with recycled powders and slag Y Lou, M Huang, S Kang, M Hu, W Wu, S Chen Case Studies in Construction Materials 20, e03195, 2024 | 9 | 2024 |
Effect of mechanical activation on reaction mechanism of one-part preparation fly ash/slag-based geopolymer Y Wang, X Wang, Y Lou, F Gao, W Wu Advances in Cement Research 34 (9), 412-426, 2022 | 9 | 2022 |
A study on flexural behavior of RC beams strengthened by self-compacting concrete under secondary load S LUO, W WU, B Chen Engineering Mechanics 32 (4), 62-68, 2015 | 6 | 2015 |
Effects of alkali activator on the chloride-ion permeability of one-part alkali-activated nickel slag concrete X Wang, Q Lan, H Lin, Y Wang, W Wu, L Xu, L Fu, C Li Case Studies in Construction Materials 20, e02970, 2024 | 5 | 2024 |
Influences of aggregate gradation on alkali-silica reaction of seawater and sea sand concrete W Wu, S Kang, Q Gong, H Yao, K Zhang, H Yang, H Li, D Wang Construction and Building Materials 427, 136268, 2024 | 5 | 2024 |
二次受力下自密实混凝土加固 RC 梁受弯性能研究 罗素蓉, 吴文达, 陈彪 工程力学 32 (4), 62-68, 2015 | 3 | 2015 |
Experimental study on seismic performance of frame joints strengthened by self-compacting concrete considering the influence of interface treatment W WU, J ZHENG Engineering Mechanics 30 (4), 89-96, 2013 | 3 | 2013 |
不同界面处理方法的自密实混凝土加固框架节点抗震性能试验研究 吴文达, 郑建岚 工程力学 30 (4), 89-96, 2013 | 3 | 2013 |