Folgen
Khaled Giasin, B.Sc, M.Sc, Ph.D, CEng, MIMechE, FHEA
Khaled Giasin, B.Sc, M.Sc, Ph.D, CEng, MIMechE, FHEA
Senior Lecturer in Engineering Design, University of Portsmouth
Bestätigte E-Mail-Adresse bei port.ac.uk
Titel
Zitiert von
Zitiert von
Jahr
Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: A review
M Aamir, M Tolouei-Rad, K Giasin, A Nosrati
The International Journal of Advanced Manufacturing Technology 105, 2289-2308, 2019
2872019
A review: Drilling performance and hole quality of aluminium alloys for aerospace applications
M Aamir, K Giasin, M Tolouei-Rad, A Vafadar
Journal of Materials Research and Technology 9 (6), 12484-12500, 2020
2582020
A review of indirect tool condition monitoring systems and decision-making methods in turning: Critical analysis and trends
M Kuntoğlu, A Aslan, DY Pimenov, ÜA Usca, E Salur, MK Gupta, ...
Sensors 21 (1), 108, 2020
2572020
An Investigation of burrs, chip formation, hole size, circularity and delamination during drilling operation of GLARE using ANOVA
K Giasin, S Ayvar-Soberanis
Composite Structures 159, 745-760, 2017
1392017
Modeling of cutting parameters and tool geometry for multi-criteria optimization of surface roughness and vibration via response surface methodology in turning of AISI 5140 steel
M Kuntoğlu, A Aslan, DY Pimenov, K Giasin, T Mikolajczyk, S Sharma
Materials 13 (19), 4242, 2020
1342020
Optimization and analysis of surface roughness, flank wear and 5 different sensorial data via tool condition monitoring system in turning of AISI 5140
M Kuntoğlu, A Aslan, H Sağlam, DY Pimenov, K Giasin, T Mikolajczyk
Sensors 20 (16), 4377, 2020
1222020
An experimental study on drilling of unidirectional GLARE fibre metal laminates
K Giasin, S Ayvar-Soberanis, A Hodzic
Composite Structures 133, 794-808, 2015
1202015
Assessment of cutting forces and hole quality in drilling Al2024 aluminium alloy: experimental and finite element study
K Giasin, A Hodzic, V Phadnis, S Ayvar-Soberanis
The International Journal of Advanced Manufacturing Technology 87, 2041-2061, 2016
1122016
Evaluation of cryogenic cooling and minimum quantity lubrication effects on machining GLARE laminates using design of experiments
K Giasin, S Ayvar-Soberanis, A Hodzic
Journal of Cleaner Production 135, 533-548, 2016
1092016
3D finite element modelling of cutting forces in drilling fibre metal laminates and experimental hole quality analysis
K Giasin, S Ayvar-Soberanis, T French, V Phadnis
Applied Composite Materials 24, 113-137, 2017
1052017
Experimental analysis and optimization of EDM parameters on HcHcr steel in context with different electrodes and dielectric fluids using hybrid taguchi-based PCA-utility and …
M Patel Gowdru Chandrashekarappa, S Kumar, DY Pimenov, K Giasin
Metals 11 (3), 419, 2021
932021
Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route
AM Sankhla, KM Patel, MA Makhesana, K Giasin, DY Pimenov, ...
journal of materials research and technology 18, 282-292, 2022
852022
Optimization and modeling of process parameters in multi-hole simultaneous drilling using taguchi method and fuzzy logic approach
M Aamir, S Tu, M Tolouei-Rad, K Giasin, A Vafadar
Materials 13 (3), 680, 2020
852020
Recent advances in bipedal walking robots: Review of gait, drive, sensors and control systems
T Mikolajczyk, E Mikołajewska, HFN Al-Shuka, T Malinowski, A Kłodowski, ...
Sensors 22 (12), 4440, 2022
822022
A comprehensive review of friction stir techniques in structural materials and alloys: challenges and trends
DAP Prabhakar, AK Shettigar, MA Herbert, MP GC, DY Pimenov, K Giasin, ...
journal of materials research and technology 20, 3025-3060, 2022
812022
Tool wear, surface roughness, cutting temperature and chips morphology evaluation of Al/TiN coated carbide cutting tools in milling of Cu–B–CrC based ceramic matrix composites
ÜA Usca, M Uzun, S Şap, M Kuntoğlu, K Giasin, DY Pimenov, ...
journal of materials research and technology 16, 1243-1259, 2022
812022
Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates
K Giasin, G Gorey, C Byrne, J Sinke, E Brousseau
Composite Structures 212, 159-174, 2019
752019
The effects of minimum quantity lubrication and cryogenic liquid nitrogen cooling on drilled hole quality in GLARE fibre metal laminates
K Giasin, S Ayvar-Soberanis, A Hodzic
Materials & Design 89, 996-1006, 2016
742016
Experimental investigation of effect of fiber length on mechanical, wear, and morphological behavior of silane-treated pineapple leaf fiber reinforced polymer composites
PB Anand, A Lakshmikanthan, MP Gowdru Chandrashekarappa, ...
Fibers 10 (7), 56, 2022
722022
Tool wear prediction in face milling of stainless steel using singular generative adversarial network and LSTM deep learning models
M Shah, V Vakharia, R Chaudhari, J Vora, DY Pimenov, K Giasin
The International Journal of Advanced Manufacturing Technology 121 (1), 723-736, 2022
682022
Das System kann den Vorgang jetzt nicht ausführen. Versuchen Sie es später erneut.
Artikel 1–20