| State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review X Liang, Z Liu, B Wang Measurement 132, 150-181, 2019 | 243 | 2019 |
| Tool wear behaviors and corresponding machined surface topography during high-speed machining of Ti-6Al-4V with fine grain tools X Liang, Z Liu Tribology International 121, 321-332, 2018 | 140 | 2018 |
| Investigation of surface topography and its deterioration resulting from tool wear evolution when dry turning of titanium alloy Ti-6Al-4V X Liang, Z Liu, G Yao, B Wang, X Ren Tribology international 135, 130-142, 2019 | 111 | 2019 |
| Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry cutting of Ti-6Al-4V X Liang, Z Liu The International Journal of Advanced Manufacturing Technology 93, 1617-1626, 2017 | 87 | 2017 |
| Modeling of plastic deformation induced by thermo-mechanical stresses considering tool flank wear in high-speed machining Ti-6Al-4V X Liang, Z Liu, B Wang, X Hou International Journal of Mechanical Sciences 140, 1-12, 2018 | 82 | 2018 |
| Stress-strain curves and modified material constitutive model for Ti-6Al-4V over the wide ranges of strain rate and temperature X Hou, Z Liu, B Wang, W Lv, X Liang, Y Hua Materials 11 (6), 938, 2018 | 79 | 2018 |
| Friction behaviors in the metal cutting process: state of the art and future perspectives X Liang, Z Liu, B Wang, C Wang, CF Cheung International Journal of Extreme Manufacturing 5 (1), 012002, 2022 | 57 | 2022 |
| Multi-pattern failure modes and wear mechanisms of WC-Co tools in dry turning Ti–6Al–4V X Liang, Z Liu, B Wang Ceramics International 46 (15), 24512-24525, 2020 | 55 | 2020 |
| Prediction of residual stress with multi-physics model for orthogonal cutting Ti-6Al-4V under various tool wear morphologies X Liang, Z Liu, B Wang, Q Song, Y Cai, Y Wan Journal of Materials Processing Technology 288, 116908, 2021 | 52 | 2021 |
| Tool wear mechanisms and surface quality assessment during micro-milling of high entropy alloy FeCoNiCrAlx X Liang, C Zhang, C Wang, K Li, YM Loh, CF Cheung Tribology International 178, 108053, 2023 | 42 | 2023 |
| Sustainability assessment of dry turning Ti-6Al-4V employing uncoated cemented carbide tools as clean manufacturing process X Liang, Z Liu, W Liu, X Li Journal of cleaner production 214, 279-289, 2019 | 40 | 2019 |
| Dynamic recrystallization characterization in Ti-6Al-4V machined surface layer with process-microstructure-property correlations X Liang, Z Liu, B Wang Applied Surface Science 530, 147184, 2020 | 36 | 2020 |
| Tool wear-induced microstructure evolution in localized deformation layer of machined Ti–6Al–4V X Liang, Z Liu, Q Wang, B Wang, X Ren Journal of Materials Science 55 (8), 3636-3651, 2020 | 32 | 2020 |
| Influences of TiAlN coating on cutting temperature during orthogonal machining H13 hardened steel G Hao, Z Liu, X Liang, J Zhao Coatings 9 (6), 355, 2019 | 32 | 2019 |
| Physic-chemical analysis for high-temperature tribology of WC-6Co against Ti–6Al–4V by pin-on-disc method X Liang, Z Liu, B Wang Tribology International 146, 106242, 2020 | 31 | 2020 |
| Micro/nano incremental material removal mechanisms in high-frequency ultrasonic vibration-assisted cutting of 316L stainless steel X Liang, C Zhang, CF Cheung, C Wang, K Li, B Bulla International Journal of Machine Tools and Manufacture 191, 104064, 2023 | 29 | 2023 |
| Tool wear induced modifications of plastic flow and deformed material depth in new generated surfaces during turning Ti-6Al-4V X Liang, Z Liu, L Chen, G Hao, B Wang, Y Cai, Q Song Journal of Materials Research and Technology 9 (5), 10782-10795, 2020 | 27 | 2020 |
| Tool wear, surface topography, and multi-objective optimization of cutting parameters during machining AISI 304 austenitic stainless steel flange X Li, Z Liu, X Liang Metals 9 (9), 972, 2019 | 23 | 2019 |
| Post processing of additively manufactured 316L stainless steel by multi-jet polishing method C Wang, YM Loh, CF Cheung, X Liang, Z Zhang, LT Ho Journal of Materials Research and Technology 23, 530-550, 2023 | 22 | 2023 |
| Surface integrity analysis for high-pressure jet assisted machined Ti-6Al-4V considering cooling pressures and injection positions X Liang, Z Liu, W Liu, B Wang, G Yao Journal of Manufacturing Processes 40, 149-159, 2019 | 22 | 2019 |
