Folgen
Kim Branner
Titel
Zitiert von
Zitiert von
Jahr
Materials for wind turbine blades: An overview
L Mishnaevsky Jr, K Branner, HN Petersen, J Beauson, M McGugan, ...
Materials 10 (11), 1285, 2017
7722017
Wind turbine surface damage detection by deep learning aided drone inspection analysis
ASM Shihavuddin, X Chen, V Fedorov, A Nymark Christensen, ...
Energies 12 (4), 676, 2019
2412019
Development of an anisotropic beam finite element for composite wind turbine blades in multibody system
T Kim, AM Hansen, K Branner
Renewable Energy 59, 172-183, 2013
1712013
Defect distribution and reliability assessment of wind turbine blades
HS Toft, K Branner, P Berring, JD Sørensen
Engineering Structures 33 (1), 171-180, 2011
952011
Damage tolerance and structural monitoring for wind turbine blades
M McGugan, G Pereira, BF Sørensen, H Toftegaard, K Branner
Philosophical Transactions of the Royal Society A: Mathematical, Physical …, 2015
932015
The effect of delaminations on local buckling in wind turbine blades
PU Haselbach, RD Bitsche, K Branner
Renewable Energy 85, 295-305, 2016
862016
Committee III. 1 ultimate strength
JK Paik, H Amlashi, B Boon, K Branner, P Caridis, P Das, M Fujikubo, ...
18th International Ship and Offshore Structures Congress, 285-363, 2012
71*2012
Understanding progressive failure mechanisms of a wind turbine blade trailing edge section through subcomponent tests and nonlinear FE analysis
X Chen, P Berring, SH Madsen, K Branner, S Semenov
Composite Structures 214, 422-438, 2019
622019
Initiation of trailing edge failure in full-scale wind turbine blade test
PU Haselbach, K Branner
Engineering Fracture Mechanics 162, 136-154, 2016
602016
Application and analysis of sandwich elements in the primary structure of large wind turbine blades
C Berggreen, K Branner, JF Jensen, JP Schultz
Journal of Sandwich Structures & Materials 9 (6), 525-552, 2007
602007
Fatigue testing of a 14.3 m composite blade embedded with artificial defects–damage growth and structural health monitoring
X Chen, S Semenov, M McGugan, SH Madsen, SC Yeniceli, P Berring, ...
Composites Part A: Applied Science and Manufacturing 140, 106189, 2021
592021
Ultimate Strength of a Large Windturbine Blade
Find Mølholt Jensen
Risø National Laboratory, Technical University of Denmark, 2008
562008
Load calculation methods for offshore wind turbine foundations
P Passon, K Branner
Ships and Offshore Structures 9 (4), 433-449, 2014
552014
Torsional performance of wind turbine blades–Part II: Numerical validation
K Branner, P Berring, C Berggreen, HW Knudsen
International conference on composite materials (ICCM-16), 8-13, 2007
542007
Torsional performance of wind turbine blades—part I: experimental investigation
P Berring, K Branner, C Berggreen, HW Knudsen
16th International Conference on Composite Materials 43, 2007
512007
Database about blade faults
K Branner, A Ghadirian
DTU Wind Energy, 2014
48*2014
A practical approach to fracture analysis at the trailing edge of wind turbine rotor blades
MA Eder, RD Bitsche, M Nielsen, K Branner
Wind Energy 17 (3), 483-497, 2014
472014
Introduction to wind turbine blade design
FM Jensen, K Branner
Advances in wind turbine blade design and materials, 3-53, 2023
402023
Blade materials, testing methods and structural design
BF Sørensen, JW Holmes, P Brøndsted, K Branner
Wind power generation and wind turbine design 1, 417-465, 2010
392010
Uncertainty modelling and code calibration for composite materials
HS Toft, K Branner, L Mishnaevsky Jr, JD Sørensen
Journal of composite materials 47 (14), 1729-1747, 2013
382013
Das System kann den Vorgang jetzt nicht ausführen. Versuchen Sie es später erneut.
Artikel 1–20