| On surface finish and dimensional accuracy of FDM parts after cold vapor treatment A Garg, A Bhattacharya, A Batish Materials and Manufacturing Processes 31 (4), 522-529, 2016 | 252 | 2016 |
| Chemical vapor treatment of ABS parts built by FDM: Analysis of surface finish and mechanical strength A Garg, A Bhattacharya, A Batish The International Journal of Advanced Manufacturing Technology 89, 2175-2191, 2017 | 184 | 2017 |
| An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study A Garg, A Bhattacharya International Journal of Mechanical Sciences 120, 225-236, 2017 | 181 | 2017 |
| Joint strength and failure studies of dissimilar AA6061-AA7075 friction stir welds: Effects of tool pin, process parameters and preheating M Raturi, A Garg, A Bhattacharya Engineering Failure Analysis 96, 570-588, 2019 | 104 | 2019 |
| Strength and failure analysis of similar and dissimilar friction stir spot welds: Influence of different tools and pin geometries A Garg, A Bhattacharya Materials & Design 127, 272-286, 2017 | 67 | 2017 |
| Failure investigation of fused deposition modelling parts fabricated at different raster angles under tensile and flexural loading A Garg, A Bhattacharya, A Batish Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2017 | 49 | 2017 |
| On lap shear strength of friction stir spot welded AA6061 alloy A Garg, A Bhattacharya Journal of Manufacturing Processes 26, 203-215, 2017 | 43 | 2017 |
| Influence of additional heating in friction stir welding of dissimilar aluminum alloys with different tool pin profiles A Garg, M Raturi, A Bhattacharya The International Journal of Advanced Manufacturing Technology 105, 155-175, 2019 | 42 | 2019 |
| Strength, failure and microstructure development for friction stir welded AA6061-T6 joints with different tool pin profiles A Garg, M Raturi, A Bhattacharya CIRP Journal of Manufacturing Science and Technology 29, 99-114, 2020 | 32 | 2020 |
| Microstructure evolution and mechanical properties of double-sided friction stir welding between AA6061-T6 and AA7075-T651 A Garg, M Raturi, A Garg, A Bhattacharya CIRP Journal of Manufacturing Science and Technology 31, 431-438, 2020 | 27 | 2020 |
| Influence of Cu powder on strength, failure and metallurgical characterization of single, double pass friction stir welded AA6061-AA7075 joints A Garg, A Bhattacharya Materials Science and Engineering: A 759, 661-679, 2019 | 27 | 2019 |
| Similar and dissimilar joining of AA6061-T6 and copper by single and multi-spot friction stirring A Garg, A Bhattacharya Journal of Materials Processing Technology 250, 330-344, 2017 | 24 | 2017 |
| Effect of cold vapour treatment on geometric accuracy of fused deposition modelling parts A Garg, A Bhattacharya, A Batish Rapid Prototyping Journal 23 (6), 1226-1236, 2017 | 17 | 2017 |
| Experimental and finite element analysis of progressive failure in friction stir welded AA6061-AA7075 joints A Garg, M Raturi, A Bhattacharya Procedia Structural Integrity 17, 456-463, 2019 | 15 | 2019 |
| Friction stir spot welding of AA6061-T6 and Cu with preheating: Strength and failure behavior at different test temperatures A Garg, A Bhattacharya The International Journal of Advanced Manufacturing Technology 108, 1613–1629, 2020 | 14 | 2020 |
| Metallurgical behavior and variation of vibro-acoustic signal during preheating assisted friction stir welding between AA6061-T6 and AA7075-T651 alloys G Ashu, M Raturi, A Bhattacharya Transactions of Nonferrous Metals Society of China 29 (8), 1610-1620, 2019 | 14 | 2019 |
| Tensile strength and failure of dissimilar friction stir welded joints between 6061-T6 and 2014-T6 aluminum alloys M Raturi, A Garg, A Bhattacharya Procedia Structural Integrity 17, 495-502, 2019 | 12 | 2019 |
| Assessing profile damage of uncoated and AlTiN coated FSW tools after successive travel on AA6061-T6 plate A Garg, A Bhattacharya CIRP Journal of Manufacturing Science and Technology 35, 839-854, 2021 | 9 | 2021 |
| Effect of tool size on AA6061‐T6 double‐sided friction stir welds A Garg, A Bhattacharya Material Design & Processing Communications 3 (5), e259, 2021 | 8 | 2021 |
| Joining of ABS parts built by material extrusion: Analysis of strength and fracture behavior B Saraf, A Garg, S Saurav, A Bhattacharya CIRP Journal of Manufacturing Science and Technology 31, 459-466, 2020 | 6 | 2020 |
Dr. Anirban BhattacharyaAssociate Professor, Mechanical Engineering Department, Indian Institute of Technology PatnaVerified email at iitp.ac.in