| Residual stress induced failure of Ti-6Al-4V/Si3N4 joints brazed with Ag-Cu-Ti filler: The effects of brazing zone’s elasto-plasticity and ceramics' intrinsic properties FS Ong, B Rheingans, K Goto, H Tobe, T Ohmura, J Janczak-Rusch, ... Journal of the European Ceramic Society 41 (13), 6319-6329, 2021 | 38 | 2021 |
| Intermetallics evolution and fracture behavior of Nb interlayer inserted Si3N4/Ti joints brazed with AgCuTi filler FS Ong, H Tobe, E Sato Materials Science and Engineering: A 762, 138096, 2019 | 35 | 2019 |
| Microstructural evolution and mechanical characterization of Nb-interlayer-inserted Ti–6Al–4V/Si3N4 joints brazed with AuNiTi filler FS Ong, H Tobe, G Fujii, E Sato Materials Science and Engineering: A 778, 139093, 2020 | 20 | 2020 |
| Strength optimization of two-step-bonded Ti-6Al-4V/Si3N4 joint with Nb interlayer via transient-liquid-phase bonding and active-metal brazing FS Ong, R Nishi, H Tobe, E Sato Journal of the European Ceramic Society 42 (6), 2707-2717, 2022 | 11 | 2022 |
| Simultaneous intermetallics suppression and residual-stress relaxation of heat-resistant Nb-interlayer-inserted Ti-6Al-4V/Si3N4 joints via one-step transient liquid phase … FS Ong, H Tobe, E Sato Journal of Materials Science & Technology 139, 79-91, 2023 | 9 | 2023 |
| Tetragonal phase stabilization and densification in AC flash-sintered 1.5 mol% yttria-stabilized zirconia polycrystals with high toughness FS Ong, K Nambu, K Hosoi, K Kawamura, H Masuda, B Feng, K Matsui, ... Journal of the European Ceramic Society 44 (2), 1036-1043, 2024 | 7 | 2024 |
| Strength optimization of low-pressure transient liquid phase bonded Ti–6Al–4V similar joint with Cu–Ni multi-interlayer R Nishi, FS Ong, H Tobe, E Sato Materials Science and Engineering: A 846, 143275, 2022 | 5 | 2022 |
| Large-displacement post-buckling response and cyclic reliability of Cu–Al–Mn shape memory alloy actuators for spacecraft deployable thermal radiators R Matsueda, FS Ong, S Oshima, H Tobe, E Sato, K Kitazono Acta Astronautica 228, 607-616, 2025 | | 2025 |
| Realizing near-full density monophasic tetragonal 1.5-mol% yttria-stabilized zirconia ceramics via current-ramp flash sintering FS Ong, K Nambu, K Kawamura, K Hosoi, H Masuda, B Feng, K Matsui, ... Acta Materialia 283, 120496, 2025 | | 2025 |
| Si3N4/Nb/Ti-6Al-4V 接合材における中間層 Nb が残留および曲げ応力の緩和に与える影響 川瀬輝， 大島草太， 戸部裕史， 松永哲也， 北薗幸一， 佐藤英一 日本機械学会論文集 90 (937), 24-00060-24-00060, 2024 | | 2024 |
Jolanta Janczak-RuschEmpa, Swiss Federal Laboratories for Materials Science and TechnologyVerified email at empa.ch