| Effect of ultrasonic shot peening on microstructure evolution and corrosion resistance of selective laser melted Ti–6Al–4V alloy Q Zhang, B Duan, Z Zhang, J Wang, C Si Journal of Materials Research and Technology 11, 1090-1099, 2021 | 111 | 2021 |
| Characteristics of 7055Al alloy powders manufactured by gas-solid two-phase atomization: A comparison with gas atomization process C Si, X Tang, X Zhang, J Wang, W Wu Materials & Design 118, 66-74, 2017 | 61 | 2017 |
| Microstructure, corrosion-resistance, and wear-resistance properties of subsonic flame sprayed amorphous Fe–Mo–Cr–Co coating with extremely high amorphous rate C Si, B Duan, Q Zhang, J Cai, W Wu Journal of Materials Research and Technology 9 (3), 3292-3303, 2020 | 56 | 2020 |
| Design and evaluation of a Laval-type supersonic atomizer for low-pressure gas atomization of molten metals C Si, X Zhang, J Wang, Y Li International Journal of Minerals, Metallurgy, and Materials 21, 627-635, 2014 | 33 | 2014 |
| Enhanced strength and sliding wear properties of gas nitrided Ti-6Al-4V alloy by ultrasonic shot peening pretreatment S Xu, Y Cao, B Duan, H Liu, J Wang, C Si Surface and Coatings Technology 458, 129325, 2023 | 31 | 2023 |
| Cavitation erosion resistance enhancement of the surface modified 2024T351 Al alloy by ultrasonic shot peening C Si, W Sun, Y Tian, J Cai Surface and Coatings Technology 452, 129122, 2023 | 31 | 2023 |
| The influence of ultrasonic shot peening on the surface roughness, microstructure, and mechanical properties of TC2 thin-sheet Q Xu, Y Cao, J Cai, J Yu, C Si Journal of Materials Research and Technology 15, 384-393, 2021 | 30 | 2021 |
| Nano-TiB whiskers reinforced Ti–6Al–4 V matrix composite fabricated by direct laser deposition: Microstructure and mechanical properties Q Zhang, W Sun, S Xu, X Zhang, J Wang, C Si Journal of Alloys and Compounds 922, 166171, 2022 | 26 | 2022 |
| Influence of mechanical alloying on the particle size, microstructure and soft magnetic properties of coarse Fe-based amorphous powders prepared by gas atomization C Si, Z Zhang, Q Zhang, J Cai Journal of Non-Crystalline Solids 559, 120675, 2021 | 25 | 2021 |
| Microstructure and mechanical properties of particle reinforced metal matrix composites prepared by gas-solid two-phase atomization and deposition technology C Si, X Tang, X Zhang, J Wang, W Wu Materials Letters 201, 78-81, 2017 | 24 | 2017 |
| Microstructure change and corrosion resistance of selective laser melted Ti-6Al-4V alloy subjected to pneumatic shot peening and ultrasonic shot peening Q Zhang, S Xu, J Wang, X Zhang, J Wang, C Si Surface Topography: Metrology and Properties 10 (1), 015010, 2022 | 23 | 2022 |
| Residual stress and microhardness evolution induced by conventional and ultrasonic shot peening Q Zhang, S Xu, Z Zhang, X Zhang, J Wang, C Si Materials Science and Technology 38 (7), 436-443, 2022 | 21 | 2022 |
| Effect of HVOF–sprayed nanostructured WC–10Co–4Cr coating on sliding wear and tensile–tensile fatigue properties of TC6 titanium alloy C Si, S Li, L Zhao, S Xu, S Chen International Journal of Refractory Metals and Hard Materials 118, 106463, 2024 | 15 | 2024 |
| Microstructure and mechanical properties of low-pressure spray-formed Zn-rich aluminum alloy C Si, X Tang, X Zhang, J Wang, W Wu Materials Express 7 (4), 273-282, 2017 | 11 | 2017 |
| High response speed microfluidic ice valves with enhanced thermal conductivity and a movable refrigeration source C Si, S Hu, X Cao, W Wu Scientific reports 7 (1), 40570, 2017 | 11 | 2017 |
| Nanostructure evolution of reticular nano-TiB whiskers reinforced titanium matrix composite subjected to ultrasonic shot peening Q Zhang, S Li, Y Cao, S Xu, X Zhang, J Wang, C Si Journal of Alloys and Compounds 948, 169704, 2023 | 10 | 2023 |
| Microstructure and sliding wear properties of WC-10Co-4Cr coatings on the inner surface of TC4 slender tube by HVOF L Zhao, Z Zhang, B Wang, S Xu, C Si Materials Letters 328, 133203, 2022 | 10 | 2022 |
| Microstructure, mechanical and wear performance of Fe-based amorphous coatings fabricated by high velocity air-fuel spraying Z Zhang, Q Zhang, S Xu, C Si Journal of Thermal Spray Technology 31 (4), 956-967, 2022 | 10 | 2022 |
| Surface repairing and strengthening of TC4 ally with recast layer by ultrasonic shot peening C Si, B Duan, J Cai Materials Letters 263, 127272, 2020 | 10 | 2020 |
| Excellent corrosion resistant amorphous coating prepared by gas atomization followed by AC-HVAF spray technology C Si, W Wu Materials Research Express 6 (5), 055202, 2019 | 10 | 2019 |
