| Structural built-up of cement-based materials used for 3D-printing extrusion techniques A Perrot, D Rangeard, A Pierre Materials and Structures 49, 1213-1220, 2016 | 1026 | 2016 |
| Prediction of lateral form pressure exerted by concrete at low casting rates A Perrot, A Pierre, S Vitaloni, V Picandet Materials and Structures 48 (7), 2315-2322, 2015 | 158 | 2015 |
| From analytical methods to numerical simulations: A process engineering toolbox for 3D concrete printing A Perrot, A Pierre, VN Nerella, RJM Wolfs, E Keita, SAO Nair, N Neithalath, ... Cement and Concrete Composites 122, 104164, 2021 | 115 | 2021 |
| Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study A Pierre, D Weger, A Perrot, D Lowke Materials and Structures 51, 1-12, 2018 | 97 | 2018 |
| Extension of spread-slump formulae for yield stress evaluation A Pierre, C Lanos, P Estelle Applied Rheology 23 (6), 63849, 2013 | 92 | 2013 |
| Cellulose ethers and cement paste permeability A Pierre, A Perrot, V Picandet, Y Guevel Cement and Concrete Research 72, 117-127, 2015 | 55 | 2015 |
| Injection 3D concrete printing in a carrier liquid-Underlying physics and applications to lightweight space frame structures D Lowke, A Vandenberg, A Pierre, A Thomas, H Kloft, N Hack Cement and Concrete Composites 124, 104169, 2021 | 35 | 2021 |
| A study on the limitations of a vane rheometer for mineral suspensions using image processing A Pierre, A Perrot, A Histace, S Gharsalli, EH Kadri Rheologica Acta 56, 351-367, 2017 | 30 | 2017 |
| Penetration of cement pastes into particle-beds: A comparison of penetration models D Weger, A Pierre, A Perrot, T Kränkel, D Lowke, C Gehlen Materials 14 (2), 389, 2021 | 29 | 2021 |
| Hygrothermal properties of an early 20th century clay brick from eastern France: Experimental characterization and numerical modelling YA Oumeziane, A Pierre, F El Mankibi, V Lepiller, M Gasnier, P Desevaux Construction and Building Materials 273, 121763, 2021 | 27 | 2021 |
| Additive manufacturing of cementitious materials by selective paste intrusion: numerical modeling of the flow using a 2D axisymmetric phase field method A Pierre, D Weger, A Perrot, D Lowke Materials 13 (21), 5024, 2020 | 19 | 2020 |
| Rheological properties of calcium sulfate suspensions A Pierre, C Lanos, P Estellé, A Perrot Cement and Concrete Research 76, 70-81, 2015 | 19 | 2015 |
| Quasi-static bubble in a yield stress fluid: elasto-plastic model G Samson, A Phelipot-Mardelé, C Lanos, A Pierre Rheologica Acta 56, 431-443, 2017 | 18 | 2017 |
| 3D printing of a cement-based mortar in a complex fluid suspension: analytical modeling and experimental tests A Benamara, A Pierre, A Kaci, Y Melinge Second RILEM International Conference on Concrete and Digital Fabrication …, 2020 | 12 | 2020 |
| Microstructure and mechanical behavior of concrete based on crushed sand combined with alluvial sand E Elat, P Pliya, A Pierre, M Mbessa, A Noumowé CivilEng 1 (3), 181-197, 2020 | 11 | 2020 |
| 2D Numerical Modelling of Particle-Bed 3D Printing by Selective Paste Intrusion A Pierre, D Weger, A Perrot, D Lowke Second RILEM International Conference on Concrete and Digital Fabrication …, 2020 | 9 | 2020 |
| Performances of super sulfated cements C Baux, A Phelipot-Mardelé, C Lanos, A Pierre, J Guilbert, M Guillaume 7th International Conference on Concrete Under Severe Conditions-Environment …, 2013 | 7 | 2013 |
| Mechanical performances of super sulfated cements C Baux, A Phelipot-Mardelé, C Lanos, A Pierre Key Engineering Materials 617, 32-35, 2014 | 6 | 2014 |
| Rhéologie de suspensions concentrées de sulfate de calcium A Pierre INSA de Rennes, 2013 | 5 | 2013 |
| Influence of the addition of crushed glass on the physical and chemical properties of lead white oil paint L Cooper, A Pierre, E Ravaud, Y Mélinge, O Majérus, D Caurant, ... Journal of Cultural Heritage 61, 238-246, 2023 | 4 | 2023 |
Arnaud PerrotIRDL, Université Bretagne SudVerified email at univ-ubs.fr