Modification of ammonium lignosulfonate by phenolation for use in phenolic resins MV Alonso, M Oliet, F Rodrıguez, J Garcıa, MA Gilarranz, JJ Rodrıguez Bioresource technology 96 (9), 1013-1018, 2005 | 236 | 2005 |
Thermal stability and pyrolysis kinetics of organosolv lignins obtained from Eucalyptus globulus JC Domínguez, M Oliet, MV Alonso, MA Gilarranz, F Rodríguez Industrial crops and products 27 (2), 150-156, 2008 | 207 | 2008 |
Determination of curing kinetic parameters of lignin–phenol–formaldehyde resol resins by several dynamic differential scanning calorimetry methods MV Alonso, M Oliet, JM Pérez, F Rodrıguez, J Echeverrıa Thermochimica Acta 419 (1-2), 161-167, 2004 | 157 | 2004 |
Characterization and structural modification of ammonic lignosulfonate by methylolation MV Alonso, JJ Rodríguez, M Oliet, F Rodríguez, J Garcia, MA Gilarranz Journal of Applied Polymer Science 82 (11), 2661-2668, 2001 | 141 | 2001 |
Formulation optimization of unreinforced and lignin nanoparticle-reinforced phenolic foams using an analysis of variance approach B Del Saz-Orozco, M Oliet, MV Alonso, E Rojo, F Rodríguez Composites Science and Technology 72 (6), 667-674, 2012 | 139 | 2012 |
Use of a methylolated softwood ammonium lignosulfonate as partial substitute of phenol in resol resins manufacture MV Alonso, M Oliet, F Rodríguez, G Astarloa, JM Echeverría Journal of Applied Polymer Science 94 (2), 643-650, 2004 | 133 | 2004 |
Comparison of lignin and cellulose solubilities in ionic liquids by COSMO-RS analysis and experimental validation A Casas, J Palomar, MV Alonso, M Oliet, S Omar, F Rodriguez Industrial Crops and Products 37 (1), 155-163, 2012 | 125 | 2012 |
Volumetric, Transport and Surface Properties of [bmim][MeSO4] and [emim][EtSO4] Ionic Liquids As a Function of Temperature A Fernández, J García, JS Torrecilla, M Oliet, F Rodríguez Journal of Chemical & Engineering Data 53 (7), 1518-1522, 2008 | 123 | 2008 |
Gelation and isoconversional kinetic analysis of lignin–phenol–formaldehyde resol resins cure MV Alonso, M Oliet, J Garcia, F Rodríguez, J Echeverría Chemical Engineering Journal 122 (3), 159-166, 2006 | 121 | 2006 |
FTIR analysis of lignin regenerated from Pinus radiata and Eucalyptus globulus woods dissolved in imidazolium‐based ionic liquids A Casas, MV Alonso, M Oliet, E Rojo, F Rodríguez Journal of Chemical Technology & Biotechnology 87 (4), 472-480, 2012 | 119 | 2012 |
Solvent effects in autocatalyzed alcohol–water pulping: comparative study between ethanol and methanol as delignifying agents M Oliet, J Garcıa, F Rodrıguez, MA Gilarrranz Chemical Engineering Journal 87 (2), 157-162, 2002 | 115 | 2002 |
Liquid–liquid equilibria for {hexane+ benzene+ 1-ethyl-3-methylimidazolium ethylsulfate} at (298.2, 313.2 and 328.2) K J García, A Fernández, JS Torrecilla, M Oliet, F Rodríguez Fluid Phase Equilibria 282 (2), 117-120, 2009 | 104 | 2009 |
Dissolution of Pinus radiata and Eucalyptus globulus woods in ionic liquids under microwave radiation: lignin regeneration and characterization A Casas, M Oliet, MV Alonso, F Rodriguez Separation and Purification Technology 97, 115-122, 2012 | 97 | 2012 |
Structural, thermal and rheological behavior of a bio-based phenolic resin in relation to a commercial resol resin JC Domínguez, M Oliet, MV Alonso, E Rojo, F Rodríguez Industrial Crops and Products 42, 308-314, 2013 | 96 | 2013 |
Ethanol‐water pulping: Cooking variables optimization MA Gilarrahz, M Oliet, F Rodriguez, J Tijero The Canadian Journal of Chemical Engineering 76 (2), 253-260, 1998 | 92 | 1998 |
Effect of fiber loading on the properties of treated cellulose fiber-reinforced phenolic composites E Rojo, MV Alonso, M Oliet, B Del Saz-Orozco, F Rodriguez Composites Part B: Engineering 68, 185-192, 2015 | 88 | 2015 |
Thermal degradation of lignin–phenol–formaldehyde and phenol–formaldehyde resol resins: structural changes, thermal stability, and kinetics MV Alonso, M Oliet, JC Dominguez, E Rojo, F Rodriguez Journal of thermal analysis and calorimetry 105 (1), 349-356, 2011 | 80 | 2011 |
Kinetic study of a phenolic-novolac resin curing process by rheological and DSC analysis JC Domínguez, MV Alonso, M Oliet, E Rojo, F Rodríguez Thermochimica acta 498 (1-2), 39-44, 2010 | 75 | 2010 |
Characterization of a novolac resin substituting phenol by ammonium lignosulfonate as filler or extender JM Pérez, F Rodriguez, MV Alonso, M Oliet, JM Echeverría BioResources 2 (2), 270-283, 2007 | 72 | 2007 |
Mechanical, thermal and morphological characterization of cellulose fiber-reinforced phenolic foams B Del Saz-Orozco, MV Alonso, M Oliet, JC Domínguez, F Rodriguez Composites Part B: Engineering 75, 367-372, 2015 | 71 | 2015 |