| Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing S Yoshida, T Bhattacharjee, Y Bai, N Tsuji Scripta Materialia 134, 33-36, 2017 | 447 | 2017 |
| Ultrafine-Grained AlCoCrFeNi2.1 Eutectic High-Entropy Alloy IS Wani, T Bhattacharjee, S Sheikh, YP Lu, S Chatterjee, P P Bhattacharjee ... Materials Research Letters, 2016 | 395 | 2016 |
| Tailoring nanostructures and mechanical properties of AlCoCrFeNi 2.1 eutectic high entropy alloy using thermo-mechanical processing IS Wani, T Bhattacharjee, S Sheikh, PP Bhattacharjee, S Guo, N Tsuji Materials Science and Engineering: A, 2016 | 337 | 2016 |
| Simultaneous strength-ductility enhancement of a nano-lamellar AlCoCrFeNi 2.1 eutectic high entropy alloy by cryo-rolling and annealing T Bhattacharjee, IS Wani, S Sheikh, IT Clark, T Okawa, S Guo, ... Scientific reports 8 (1), 1-8, 2018 | 271 | 2018 |
| Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high/medium entropy alloys S Yoshida, T Ikeuchi, T Bhattacharjee, Y Bai, A Shibata, N Tsuji Acta Materialia 171, 201-215, 2019 | 247 | 2019 |
| Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloy RR Eleti, T Bhattacharjee, A Shibata, N Tsuji Acta Materialia 171, 132-145, 2019 | 169 | 2019 |
| Hot deformation behavior of CoCrFeMnNi FCC high entropy alloy RR Eleti, T Bhattacharjee, L Zhao, PP Bhattacharjee, N Tsuji Materials Chemistry and Physics 210, 176-186, 2018 | 148 | 2018 |
| Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures R Zheng, T Bhattacharjee, A Shibata, T Sasaki, K Hono, M Joshi, N Tsuji Scripta Materialia 131, 1-5, 2017 | 147 | 2017 |
| Effect of low temperature on tensile properties of AlCoCrFeNi2. 1 eutectic high entropy alloy T Bhattacharjee, R Zheng, Y Chong, S Sheikh, S Guo, IT Clark, T Okawa, ... Materials Chemistry and Physics 210, 207-212, 2018 | 131 | 2018 |
| Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy IS Wani, T Bhattacharjee, S Sheikh, IT Clark, MH Park, T Okawa, S Guo, ... Intermetallics 84, 42-51, 2017 | 131 | 2017 |
| Mechanical properties of fully martensite microstructure in Ti-6Al-4V alloy transformed from refined beta grains obtained by rapid heat treatment (RHT) Y Chong, T Bhattacharjee, J Yi, A Shibata, N Tsuji Scripta Materialia 138, 66-70, 2017 | 111 | 2017 |
| Nanostructuring with Structural-Compositional Dual Heterogeneities Enhances Strength-Ductility Synergy in Eutectic High Entropy Alloy SR Reddy, S Yoshida, T Bhattacharjee, N Sake, A Lozinko, S Guo, ... Scientific Reports 9 (1), 1-9, 2019 | 95 | 2019 |
| Bi-lamellar microstructure in Ti–6Al–4V: Microstructure evolution and mechanical properties Y Chong, T Bhattacharjee, N Tsuji Materials Science and Engineering: A 762, 138077, 2019 | 93 | 2019 |
| Factors determining room temperature mechanical properties of bimodal microstructures in Ti-6Al-4V alloy Y Chong, T Bhattacharjee, MH Park, A Shibata, N Tsuji Materials Science and Engineering: A 730, 217-222, 2018 | 84 | 2018 |
| Severe plastic deformation driven nanostructure and phase evolution in a Al0.5CoCrFeMnNi dual phase high entropy alloy TS Reddy, IS Wani, T Bhattacharjee, SR Reddy, R Saha, ... Intermetallics 91, 150-157, 2017 | 74 | 2017 |
| High strength and formable Mg–6.2 Zn–0.5 Zr–0.2 Ca alloy sheet processed by twin roll casting T Bhattacharjee, BC Suh, TT Sasaki, T Ohkubo, NJ Kim, K Hono Materials Science and Engineering: A 609, 154-160, 2014 | 74 | 2014 |
| Effect of Zr addition on the precipitation in Mg–Zn-based alloy T Bhattacharjee, CL Mendis, TT Sasaki, T Ohkubo, K Hono Scripta Materialia 67 (12), 967-970, 2012 | 73 | 2012 |
| Change of Deformation Mechanisms Leading to High Strength and Large Ductility in Mg-Zn-Zr-Ca Alloy with Fully Recrystallized Ultrafine Grained Microstructures R Zheng, T Bhattacharjee, S Gao, W Gong, A Shibata, T Sasaki, K Hono, ... Scientific reports 9 (1), 1-14, 2019 | 69 | 2019 |
| Deformation mechanism of bimodal microstructure in Ti-6Al-4V alloy: the effects of intercritical annealing temperature and constituent hardness Y Chong, T Bhattacharjee, Y Tian, A Shibata, N Tsuji Journal of Materials Science & Technology 71, 138-151, 2021 | 66 | 2021 |
| Effect of microalloyed Zr on the extruded microstructure of Mg–6.2 Zn-based alloys T Bhattacharjee, T Nakata, TT Sasaki, S Kamado, K Hono Scripta Materialia 90, 37-40, 2014 | 64 | 2014 |
Pinaki Prasad BhattacharjeeProfessor of Materials Science and Metallurgical Engineering, IIT HyderabadVerified email at iith.ac.in