| Dynamic behaviors of angular contact ball bearing with a localized surface defect considering the influence of cage and oil lubrication C Wen, X Meng, C Fang, J Gu, L Xiao, S Jiang Mechanism and Machine Theory 162, 104352, 2021 | 67 | 2021 |
| An improved technique for measuring piston-assembly friction and comparative analysis with numerical simulations: Under motored condition C Fang, X Meng, Y Xie, C Wen, R Liu Mechanical Systems and Signal Processing 115, 657-676, 2019 | 38 | 2019 |
| On the oil-gas-solid mixed bearing between compression ring and cylinder liner under starved lubrication and high boundary pressures Z Liu, X Meng, C Wen, S Yu, Z Zhou Tribology International 140, 105869, 2019 | 33 | 2019 |
| A deterministic contact evolution and scuffing failure analysis considering lubrication deterioration due to temperature rise under heavy loads B Lyu, X Meng, R Zhang, C Wen Engineering Failure Analysis 123, 105276, 2021 | 29 | 2021 |
| Starved lubrication analysis of angular contact ball bearing based on a multi-degree-of-freedom tribo-dynamic model C Wen, X Meng, J Gu, L Xiao, S Jiang, H Bi Friction 11 (8), 1395-1418, 2023 | 21 | 2023 |
| Measurement of the friction force of sliding friction pairs in low-speed marine diesel engines and comparison with numerical simulation R Li, C Wen, X Meng, Y Xie Applied Ocean Research 121, 103089, 2022 | 20 | 2022 |
| Online measurement of piston-assembly friction with wireless IMEP method under fired conditions and comparison with numerical analysis C Wen, X Meng, Y Xie, R Liu, X Kong, R Li, Z Liu, C Fang Measurement 174, 109009, 2021 | 19 | 2021 |
| Influence of angular misalignment on the tribological performance of high-speed micro ball bearings considering full multibody interactions C Wen, X Meng, B Lyu, J Gu, L Xiao Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2021 | 13 | 2021 |
| Numerical analysis of textured piston compression ring conjunction using two-dimensional-computational fluid dynamics and Reynolds methods C Wen, X Meng, W Li Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2018 | 12 | 2018 |
| Modeling and performance analysis of rotary compressor considering multi-body coupling and bearing deformation C Wen, Z Liu, P Bai, J Guan, K Gao, X Wen, Y Tian Tribology International 189, 108981, 2023 | 4 | 2023 |
| Post-impact squeeze-out behavior of oils with different pressure-dependent rheological properties J Fang, X Wen, P Bai, X Li, W Chen, X Hou, C Wen, Y Meng, L Ma, Y Tian Tribology International 187, 108695, 2023 | 4 | 2023 |
| Dynamic modeling and characteristics analysis of sliding vane in a high-speed rotary compressor considering groove distribution and multi-body coupling C Wen, Z Liu, X Wen, K Gao, J Guan, P Bai, Y Meng, Y Tian Tribology International 194, 109505, 2024 | 3 | 2024 |
| Theoretical model development and mixed lubrication analyses of rolling piston type rotary compressors: A Review C Wen, P Bai, H Zhang, S Zhang, X Meng, Y Meng, Y Tian Lubricants 12 (8), 273, 2024 | 2 | 2024 |
| Effects of surface morphology on tribological properties of Arapaima gigas scales S Zhang, P Bai, X Wen, C Wen, H Cao, W Yang, Y Tian Friction 12 (7), 1469-1482, 2024 | | 2024 |