Macrodeformation twins in single-crystal aluminum F Zhao, L Wang, D Fan, BX Bie, XM Zhou, T Suo, YL Li, MW Chen, CL Liu, ... Physical review letters 116 (7), 075501, 2016 | 137 | 2016 |
A versatile split Hopkinson pressure bar using electromagnetic loading H Nie, T Suo, B Wu, Y Li, H Zhao International Journal of Impact Engineering 116, 94-104, 2018 | 98 | 2018 |
Compressive behavior of C/SiC composites over a wide range of strain rates and temperatures T Suo, X Fan, G Hu, Y Li, Z Tang, P Xue Carbon 62, 481-492, 2013 | 97 | 2013 |
The simulation of deformation distribution during ECAP using 3D finite element method T Suo, Y Li, Y Guo, Y Liu Materials Science and Engineering: A 432 (1-2), 269-274, 2006 | 97 | 2006 |
Dynamic mechanical responses of the Al0· 1CoCrFeNi high entropy alloy at cryogenic temperature K Jiang, T Ren, G Shan, T Ye, L Chen, C Wang, F Zhao, J Li, T Suo Materials Science and Engineering: A 797, 140125, 2020 | 82 | 2020 |
Determination of dynamic elastic modulus of polymeric materials using vertical split Hopkinson pressure bar YG Miao, YL Li, HY Liu, Q Deng, L Shen, YW Mai, YZ Guo, T Suo, HT Hu, ... International Journal of Mechanical Sciences 108, 188-196, 2016 | 82 | 2016 |
应力波基础简明教程 郭伟国, 李玉龙, 索涛 西北工业大学出版社, 2007 | 82 | 2007 |
Numerical and experimental investigation on hail impact on composite panels Z Tang, C Hang, T Suo, Y Wang, L Dai, Y Zhang, Y Li International Journal of Impact Engineering 105, 102-108, 2017 | 72 | 2017 |
Dynamic mechanical behavior of 6061 al alloy at elevated temperatures and different strain rates X Fan, T Suo, Q Sun, T Wang Acta Mechanica Solida Sinica 26 (2), 111-120, 2013 | 72 | 2013 |
Influence of heat-treatment on the dynamic behavior of 3D laser-deposited Ti–6Al–4V alloy J Yao, T Suo, S Zhang, F Zhao, H Wang, J Liu, Y Chen, Y Li Materials Science and Engineering: A 677, 153-162, 2016 | 69 | 2016 |
确定材料在高温高应变率下动态性能的 Hopkinson 杆系统 李玉龙, 索涛, 郭伟国, 胡锐, 李金山, 傅恒志 爆炸与冲击 25 (6), 487-492, 2005 | 69* | 2005 |
Optimal pressing route for continued equal channel angular pressing by finite element analysis T Suo, Y Li, Q Deng, Y Liu Materials Science and Engineering: A 466 (1-2), 166-171, 2007 | 66 | 2007 |
Static and dynamic Brazilian disk tests for mechanical characterization of annealed and chemically strengthened glass MZ Sheikh, Z Wang, B Du, T Suo, Y Li, F Zhou, Y Wang, UA Dar, G Gao, ... Ceramics International 45 (6), 7931-7944, 2019 | 64 | 2019 |
Compressive behavior and rate-controlling mechanisms of ultrafine grained copper over wide temperature and strain rate ranges T Suo, Y Li, F Zhao, X Fan, W Guo Mechanics of Materials 61, 1-10, 2013 | 64 | 2013 |
Strain rate sensitivity and deformation kinetics of ECAPed aluminium over a wide range of strain rates T Suo, Y Chen, Y Li, C Wang, X Fan Materials Science and Engineering: A 560, 545-551, 2013 | 64 | 2013 |
Abnormal hardening and amorphization in an FCC high entropy alloy under extreme uniaxial tension K Jiang, Q Zhang, J Li, X Li, F Zhao, B Hou, T Suo International Journal of Plasticity 159, 103463, 2022 | 63 | 2022 |
Effects of strain rate on mechanical properties of nanosilica/epoxy YG Miao, HY Liu, T Suo, YW Mai, FQ Xie, YL Li Composites Part B: Engineering 96, 119-124, 2016 | 59 | 2016 |
Effects of loading rates on mode I interlaminar fracture toughness of carbon/epoxy composite toughened by carbon nanotube films Z Li, Y Wang, J Cao, X Meng, RM Aamir, W Lu, T Suo Composites Part B: Engineering 200, 108270, 2020 | 58 | 2020 |
On adiabatic shear localization in nanostructured face-centered cubic alloys with different stacking fault energies J Li, Y Li, C Huang, T Suo, Q Wei Acta Materialia 141, 163-182, 2017 | 57 | 2017 |
Investigation into different numerical methods in predicting the response of aluminosilicate glass under quasi-static and impact loading conditions Z Wang, D Ma, T Suo, Y Li, A Manes International Journal of Mechanical Sciences 196, 106286, 2021 | 56 | 2021 |