Articles avec mandats d'accès public - Jörg FrankeEn savoir plus
Non disponibles : 58
Power cycling reliability results of GaN HEMT devices
J Franke, G Zeng, T Winkler, J Lutz
2018 IEEE 30th International Symposium on Power Semiconductor Devices and …, 2018
Exigences : Federal Ministry of Education and Research, Germany
Laser Beam Melting of NdFeB for the production of rare-earth magnets
T Kolb, F Huber, B Akbulut, C Donocik, N Urban, D Maurer, J Franke
2016 6th International Electric Drives Production Conference (EDPC), 34-40, 2016
Exigences : German Research Foundation, Federal Ministry of Education and Research, Germany
Influences of process parameters on rare earth magnets produced by laser beam melting
N Urban, F Huber, J Franke
2017 7th International Electric Drives Production Conference (EDPC), 1-5, 2017
Exigences : German Research Foundation
Automated in-house transportation of small load carriers with autonomous unmanned aerial vehicles
M Lieret, V Kogan, S Döll, J Franke
2019 IEEE 15th International Conference on Automation Science and …, 2019
Exigences : Federal Ministry of Education and Research, Germany
Integration of polymer optical waveguides by using flexographic and aerosol jet printing
T Reitberger, J Franke, GA Hoffmann, L Overmeyer, L Lorenz, KJ Wolter
2016 12th International Congress Molded Interconnect Devices (MID), 1-6, 2016
Exigences : German Research Foundation
Aerosol Jet® printing of optical waveguides
T Reitberger, J Hoerber, R Schramm, S Sennefelder, J Franke
2015 38th International Spring Seminar on Electronics Technology (ISSE), 5-10, 2015
Exigences : German Research Foundation
Innovative developments for automated magnet handling and bonding of rare earth magnets
J Franke, J Tremel, A Kühl
2011 IEEE International Symposium on Assembly and Manufacturing (ISAM), 1-5, 2011
Exigences : German Research Foundation
Asymmetric optical bus coupler for interruption-free short-range connections on board and module level
L Lorenz, K Nieweglowski, Z Al-Husseini, N Neumann, D Plettemeier, ...
Journal of Lightwave Technology 35 (18), 4033-4039, 2017
Exigences : German Research Foundation
ArUcoE: enhanced ArUco marker
O Kedilioglu, TM Bocco, M Landesberger, A Rizzo, J Franke
2021 21st International Conference on Control, Automation and Systems (ICCAS …, 2021
Exigences : Federal Ministry of Education and Research, Germany
Advanced temperature estimation in low Rds, on p-GaN HEMT devices for performing power cycling tests
J Franke, C Bäumler, D Kretzschmar, J Lutz
PCIM Europe 2019; International Exhibition and Conference for Power …, 2019
Exigences : Federal Ministry of Education and Research, Germany
Influence of cutting edge on core loss induced through various manufacturing parameters
M Schneider, M Hubert, J Franke
2016 6th International Electric Drives Production Conference (EDPC), 186-192, 2016
Exigences : German Research Foundation
Additive manufacturing of 3D circuit carriers with improved thermal conductivity
D Utsch, N Piechulek, J Franke
2022 45th International Spring Seminar on Electronics Technology (ISSE), 1-6, 2022
Exigences : Federal Ministry of Education and Research, Germany
Fault detection for autonomous multirotors using a redundant flight control architecture
M Lieret, J Fertsch, J Franke
2020 IEEE 16th International Conference on Automation Science and …, 2020
Exigences : Federal Ministry of Education and Research, Germany
Aerosol jet printed optical waveguides for short range communication
L Lorenz, K Nieweglowski, Z Al-Husseini, N Neumann, D Plettemeier, ...
Journal of Lightwave Technology 38 (13), 3478-3484, 2020
Exigences : German Research Foundation
Supporting manual assembly through merging live position data and 3D-CAD data using a worker information system
D Meinel, F Ehler, M Lipka, J Franke
Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter, 187-194, 2018
Exigences : Federal Ministry of Education and Research, Germany
Demand-based dimensioning of compressed air systems for energy optimization and flexibility
T Javied, F Kimmig, J Franke
2018 4th International Conference on Control, Automation and Robotics (ICCAR …, 2018
Exigences : Federal Ministry of Education and Research, Germany
Important parameters of printed polymer optical waveguides (POWs) in simulation and fabrication
T Reitberger, F Loosen, A Schrauf, N Lindlein, J Franke
Physics and Simulation of Optoelectronic Devices XXV 10098, 231-239, 2017
Exigences : German Research Foundation
A novel engineering process for spatial opto-mechatronic applications
J Franke, J Zeitler, T Reitberger
CIRP Annals 65 (1), 153-156, 2016
Exigences : German Research Foundation
Modeling, simulation and manufacturing of polymer optical waveguides by using the optaver process
T Reitberger, J Zeitler, C Backhaus, GA Hoffmann, A Wienke, L Lorenz, ...
Applied Industrial Optics: Spectroscopy, Imaging and Metrology, T2A. 1, 2019
Exigences : German Research Foundation
Mechanical qualification and microstructural analysis of alumina produced by material extrusion
D Utsch, P Bründl, J Franke, H Erdogan
Materials Science and Engineering: A 883, 145456, 2023
Exigences : German Research Foundation, Federal Ministry of Education and Research, Germany
Les informations concernant la publication et le financement sont déterminées automatiquement par un programme informatique