| Microstructures and mechanical properties of C-containing FeCoCrNi high-entropy alloy fabricated by selective laser melting R Zhou, Y Liu, C Zhou, S Li, W Wu, M Song, B Liu, X Liang, PK Liaw Intermetallics 94, 165-171, 2018 | 195 | 2018 |
| Nitrogen induced heterogeneous structures overcome strength-ductility trade-off in an additively manufactured high-entropy alloy M Song, R Zhou, J Gu, Z Wang, S Ni, Y Liu Applied Materials Today 18, 100498, 2020 | 169 | 2020 |
| Nanosized precipitates and dislocation networks reinforced C-containing CoCrFeNi high-entropy alloy fabricated by selective laser melting W Wu, R Zhou, B Wei, S Ni, Y Liu, M Song Materials Characterization 144, 605-610, 2018 | 160 | 2018 |
| Microstructures and wear behaviour of (FeCoCrNi) 1-x (WC) x high entropy alloy composites R Zhou, G Chen, B Liu, J Wang, L Han, Y Liu International Journal of Refractory Metals and Hard Materials 75, 56-62, 2018 | 129 | 2018 |
| Precipitation behavior of selective laser melted FeCoCrNiC0. 05 high entropy alloy R Zhou, Y Liu, B Liu, J Li, Q Fang Intermetallics 106, 20-25, 2019 | 116 | 2019 |
| Flow behavior and microstructures of powder metallurgical CrFeCoNiMo0. 2 high entropy alloy during high temperature deformation J Wang, Y Liu, B Liu, Y Wang, Y Cao, T Li, R Zhou Materials Science and Engineering: A 689, 233-242, 2017 | 101 | 2017 |
| Microstructures and tribological properties of TiC reinforced FeCoNiCuAl high-entropy alloy at normal and elevated temperature T Zhu, H Wu, R Zhou, N Zhang, Y Yin, L Liang, Y Liu, J Li, Q Shan, Q Li, ... Metals 10 (3), 387, 2020 | 40 | 2020 |
| Dual heterogeneous structure facilitating an excellent strength-ductility combination in an additively manufactured multi-principal-element alloy J Huang, W Li, J He, R Zhou, TH Chou, T Yang, CT Liu, W Zhang, Y Liu, ... Materials Research Letters 10 (9), 575-584, 2022 | 39 | 2022 |
| A eutectic high-entropy alloy with good high-temperature strength-plasticity balance L Han, X Xu, L Wang, F Pyczak, R Zhou, Y Liu Materials Research Letters 7 (11), 460-466, 2019 | 36 | 2019 |
| Passivation evolution of Ti-Ta-Nb medium-entropy sputtered thin films in sulfuric acid solution WY Chen, YH Chen, WP Li, R Zhou, TH Chou, X Wang, JC Huang Applied Surface Science 576, 151824, 2022 | 25 | 2022 |
| Effect of interstitial carbon and nitrogen on corrosion of FeCoCrNi multi-principal element alloys made by selective laser melting W Chen, R Zhou, W Li, YH Chen, TH Chou, X Wang, Y Liu, Y Zhu, ... Journal of Materials Science & Technology 148, 52-63, 2023 | 19 | 2023 |
| An additively manufactured precipitation hardening medium entropy alloy with excellent strength-ductility synergy over a wide temperature range J Huang, W Li, T Yang, TH Chou, R Zhou, B Liu, JC Huang, Y Liu Journal of Materials Science & Technology 197, 247-264, 2024 | 14 | 2024 |
| 3D printed N-doped CoCrFeNi high entropy alloy with more than doubled corrosion resistance in dilute sulphuric acid R Zhou, W Chen, W Li, TH Chou, YH Chen, X Liang, J Luan, Y Zhu, ... npj Materials Degradation 7 (1), 8, 2023 | 11 | 2023 |
| Microstructure evolution and mechanical properties of in-situ multi-component carbides reinforced FeCoNi alloy S Liu, W Zhang, Y Peng, R Zhou, H Wang, Q Ma Journal of Alloys and Compounds 886, 161215, 2021 | 11 | 2021 |
| Improvement on high-temperature tensile strength and ductility of selective electron beam melting TiAl alloys via small-strain forging H Tao, H Li, L Wang, Y Che, W He, H Li, R Zhou, X Liang Materials Science and Engineering: A 873, 145009, 2023 | 9 | 2023 |
| Low modulus and bioactive Ti/α-TCP/Ti-mesh composite prepared by spark plasma sintering Y Guo, Y Tan, Y Liu, S Liu, R Zhou, H Tang Materials Science and Engineering: C 80, 197-206, 2017 | 8 | 2017 |
| Critical impacts of thermodynamic instability and short-range order on deformation mechanisms of VCoNi medium-entropy alloy TH Chou, WP Li, LY Zhu, F Zhu, XC Li, J Huang, YX Wang, R Zhou, ... Acta Materialia 277, 120190, 2024 | 6 | 2024 |
| Optimization of hot-rolling parameters for a powder metallurgy Ti–47Al–2Cr–2Nb-0.2 W alloy based on processing map and microstructure evolution H Tao, X Liang, Y Che, R Zhou, L Wang, H Li Journal of Materials Research and Technology 30, 7284-7294, 2024 | 6 | 2024 |
| Severe plastic deformation induced nano dispersion and strengthening effect in oxide dispersion strengthened copper fabricated by cold spray additive manufacturing Y Peng, P Gao, W Zhang, L Cui, S Liu, W Chen, J Li, R Zhou, G Liu, ... Materials Characterization 205, 113281, 2023 | 6 | 2023 |
| In-vitro and in-vivo bio-corrosion and biocompatibility responses of bioactive TiTaNb films with various Ta contents on Ti6Al4V implants YH Chen, WY Chen, YS Lin, CH Chen, R Zhou, TH Chou, WP Li, X Wang, ... Journal of Materials Research and Technology 25, 3803-3818, 2023 | 6 | 2023 |
