| Application of finite element analysis in oral and maxillofacial surgery—A literature review M Lisiak-Myszke, D Marciniak, M Bieliński, H Sobczak, Ł Garbacewicz, ... Materials 13 (14), 3063, 2020 | 107 | 2020 |
| Influence of extruder’s nozzle diameter on the improvement of functional properties of 3D-printed PLA products P Czyżewski, D Marciniak, B Nowinka, M Borowiak, M Bieliński Polymers 14 (2), 356, 2022 | 59 | 2022 |
| Post-processing time dependence of shrinkage and mechanical properties of injection-molded polypropylene A Kościuszko, D Marciniak, D Sykutera Materials 14 (1), 22, 2020 | 34 | 2020 |
| Recycling of ABS operating elements obtained from industry 3D printing machines D Marciniak, P Czyżewski, D Sykutera, M Bieliński Polimery 64 (11-12), 803-810, 2019 | 12 | 2019 |
| Effect of surface modification by acetone vaporization on the structure of 3D printed acrylonitrile-butadiene-styrene elements D Marciniak, P Szewczykowski, P Czyżewski, D Sykutera, M Bieliński Polimery 63 (11-12), 785-790, 2018 | 9 | 2018 |
| Influence of FFF process parameters and macrostructure homogeneity on PLA impact strength M Bączkowski, D Marciniak, M Bieliński Polimery 66 (9), 480-483, 2021 | 6 | 2021 |
| Analysis of microcellular injection molding with use of FEM simulation B Nowinka, P Czyżewski, D Sykutera, D Marciniak AIP Conference Proceedings 2611 (1), 2022 | 5 | 2022 |
| Automatic Production of [18F]F-DOPA Using the Raytest SynChrom R&D Module P Waśniowski, J Czuczejko, M Chuchra, M Wędrowski, D Marciniak, ... Pharmaceuticals 16 (1), 10, 2022 | 3 | 2022 |
| The influence of lunar regolith simulant selected functional properties of polymeric materials used in FFF technology D Pietrusiak, P Czyżewski, D Marciniak, M Józefowicz, M Macko, ... AIP Conference Proceedings 3130 (1), 2024 | 1 | 2024 |
| Investigating the effect of filling the filament with rubber powder in the additive manufacturing process K Majewska-Laks, D Marciniak, D Sykutera AIP Conference Proceedings 3130 (1), 2024 | | 2024 |
| The influence of injection mold cavity type finished with the EDM process on the polymer moldings surface condition M Rojewski, P Czyżewski, D Marciniak, D Sykutera AIP Conference Proceedings 3130 (1), 2024 | | 2024 |
| Influence of reinforcing elements on the structure, properties and dimensional accuracy of 3D printing models A Kościuszko, D Marciniak, M Rojewski, N Konczal AIP Conference Proceedings 3130 (1), 2024 | | 2024 |
| Study on the influence of the pattern angle on the functional properties of products printed from porous PLA filament P Czyżewski, D Marciniak, M Bieliński, Y Bevz AIP Conference Proceedings 3130 (1), 2024 | | 2024 |
| Analysis of mechanical properties and structureof samples filled with continuous glass fiberproduced in composite filament fabricationtechnology D Marciniak, D Sykutera, P Czyżewski Bulletin of the Polish Academy of Sciences Technical Sciences, e148841-e148841, 2024 | | 2024 |
| Mechanical properties of ABS samples manufactured under different process conditions P Czyżewski, D Marciniak, D Sykutera Bulletin of the Polish Academy of Sciences. Technical Sciences 72 (1), 2024 | | 2024 |
| The use of numerical methods in the analysis of strain and deformation of the large-size thermosets composites D Marciniak, B Nowinka, P Czyżewski, D Sykutera AIP Conference Proceedings 2611 (1), 2022 | | 2022 |
| Assessment of the surface and structure of elements produced in additive manufacturing technology after chemical treatment D Marciniak MATEC Web of Conferences 332, 01010, 2021 | | 2021 |
| Post-Processing Time Dependence of Shrinkage and Mechan-ical Properties of Injection-Molded Polypropylene. Materials 2021, 14, 22 A Kosciuszko, D Marciniak, D Sykutera s Note: MDPI stays neu-tral with regard to jurisdictional claims in …, 2020 | | 2020 |
| Technologiczne i ekologiczne aspekty wytwarzania elementów metodą Fused Deposition Modeling (FDM) D Marciniak, A Kosciuszko, L Wajer, M Bielinski Ekologia i Technika 24 (3), 2016 | | 2016 |
