| An aerosol rapid compression machine for studying energetic-nanoparticle-enhanced combustion of liquid fuels C Allen, G Mittal, CJ Sung, E Toulson, T Lee Proceedings of the Combustion Institute 33 (2), 3367-3374, 2011 | 214 | 2011 |
| Ignition behavior and surrogate modeling of JP-8 and of camelina and tallow hydrotreated renewable jet fuels at low temperatures C Allen, D Valco, E Toulson, T Edwards, T Lee Combustion and Flame 160 (2), 232-239, 2013 | 110 | 2013 |
| Application of a novel charge preparation approach to testing the autoignition characteristics of JP-8 and camelina hydroprocessed renewable jet fuel in a rapid compression machine C Allen, E Toulson, T Edwards, T Lee Combustion and Flame 159 (9), 2780-2788, 2012 | 87 | 2012 |
| Autoignition behavior of synthetic alternative jet fuels: An examination of chemical composition effects on ignition delays at low to intermediate temperatures D Valco, G Gentz, C Allen, M Colket, T Edwards, S Gowdagiri, ... Proceedings of the Combustion Institute 35 (3), 2983-2991, 2015 | 66 | 2015 |
| Characterization of the effect of fatty ester composition on the ignition behavior of biodiesel fuel sprays C Allen, E Toulson, D Tepe, H Schock, D Miller, T Lee Fuel 111, 659-669, 2013 | 38 | 2013 |
| Ignition characteristics of diesel and canola biodiesel sprays in the low-temperature combustion regime CM Allen, E Toulson, DLS Hung, H Schock, D Miller, T Lee Energy & fuels 25 (7), 2896-2908, 2011 | 38 | 2011 |
| Application of a multi-zone model for the prediction of species concentrations in rapid compression machine experiments D Wilson, C Allen Combustion and Flame 171, 185-197, 2016 | 26 | 2016 |
| JP-5 and HRJ-5 autoignition characteristics and surrogate modeling C Allen, D Valco, E Toulson, JH Yoo, T Lee Energy & fuels 27 (12), 7790-7799, 2013 | 26 | 2013 |
| Optimization of a multi-step model for the auto-ignition of dimethyl ether in a rapid compression machine E Toulson, CM Allen, DJ Miller, HJ Schock, T Lee Energy & fuels 24 (6), 3510-3516, 2010 | 23 | 2010 |
| Comparison of fossil and wood fuels EH Hall, CM Allen, DA Ball, JE Burch, HN Conkle Final Report Battelle Columbus Labs, 1976 | 22 | 1976 |
| Advanced rapid compression machine test methods and surrogate fuel modeling for bio-derived jet and diesel fuel autoignition CM Allen Michigan State University. Mechanical Engineering, 2012 | 20 | 2012 |
| Energetic-nanoparticle enhanced combustion of liquid fuels in a rapid compression machine C Allen, T Lee 47th AIAA aerospace sciences meeting including the new horizons forum and …, 2009 | 20 | 2009 |
| Modeling the auto-ignition of oxygenated fuels using a multistep model E Toulson, CM Allen, DJ Miller, T Lee Energy & fuels 24 (2), 888-896, 2010 | 16 | 2010 |
| On the influence of initial conditions and facility effects on rapid compression machine data J Ezzell, D Wilson, C Allen Fuel 245, 368-383, 2019 | 13 | 2019 |
| Modeling the autoignition of fuel blends with a multistep model E Toulson, CM Allen, DJ Miller, J McFarlane, HJ Schock, T Lee Energy & fuels 25 (2), 632-639, 2011 | 13 | 2011 |
| Conventional and bio-derived jet fuel surrogate modeling in low temperature and lean combustion A Oldani, D Valco, K Min, J Edwards, CB Kweon, C Allen, T Lee Energy & Fuels 29 (7), 4597-4607, 2015 | 9 | 2015 |
| An experimental investigation of the autoignition characteristics of camelina-based hydroprocessed renewable jet fuel C Allen, E Toulson, T Lee 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and …, 2011 | 7 | 2011 |
| A comparison of sensitivity metrics for two-stage ignition behavior in rapid compression machines D Wilson, C Allen Fuel 208, 305-313, 2017 | 6 | 2017 |
| Experimental validation of an unscented Kalman filter for estimating transient engine exhaust composition with Fourier transform infrared spectroscopy D Wilson, C Allen Energy & Fuels 32 (11), 11899-11912, 2018 | 5 | 2018 |
| Experimental measurements of soot formation in fuel-rich homogeneous mixtures using an optical rapid compression machine JR Gross, AB Dempsey, JR Kempf, CM Allen International Journal of Engine Research 24 (7), 3197-3213, 2023 | 4 | 2023 |