| Microstructural characteristics of forged and heat treated Inconel-718 disks A Chamanfar, L Sarrat, M Jahazi, M Asadi, A Weck, AK Koul Materials & Design (1980-2015) 52, 791-800, 2013 | 227 | 2013 |
| Effect of pre-strain and work hardening rate on void growth and coalescence in AA5052 Y Alinaghian, M Asadi, A Weck International Journal of Plasticity 53, 193-205, 2014 | 37 | 2014 |
| Combinatorial optimization of weld sequence by using a surrogate model to mitigate a weld distortion M Asadi, JA Goldak International Journal of Mechanics and Materials in Design 7, 123-139, 2011 | 37 | 2011 |
| Why power per unit length of weld does not characterize a weld? J Goldak, M Asadi, RG Alena Computational Materials Science 48 (2), 390-401, 2010 | 32 | 2010 |
| Analysis of predicted residual stress in a weld and comparison with experimental data using regression model M Asadi, JA Goldak, J Nielsen, J Zhou, S Tchernov, D Downey International Journal of Mechanics and Materials in Design 5, 353-364, 2009 | 29 | 2009 |
| Constructing a validated deformation mechanisms map using low temperature creep strain accommodation processes for nickel-base alloy 718 M Asadi, D Guillot, A Weck, SR Hegde, AK Koul, T Sawatzky, H Saari Pressure Vessels and Piping Conference 55010, 65-73, 2012 | 20 | 2012 |
| Challenges in validation of computational weld mechanics code to compute residual stress and distortion in welds J Goldak, M Asadi Journal of Pressure Vessel Technology 136 (1), 011201, 2014 | 15 | 2014 |
| An integrated computational welding mechanics with direct-search optimization for mitigation of distortion in an aluminum bar using side heating M Asadi, JA Goldak Journal of Manufacturing Science and Engineering 136 (1), 011007, 2014 | 13 | 2014 |
| Computational Weld Mechanics and Optimization of J Goldak, M Asadi | 13 | 2011 |
| Challenges in verification of CWM software to compute residual stress and distortion in weld M Asadi, JA Goldak Proceeding of the ASME 2010 Pressure Vessel and Piping Division Conference …, 2010 | 12 | 2010 |
| Mitigation of Distortion in an Edge-Welded Bar by Clamping Parameters M Asadi, JA Goldak Pressure Vessels and Piping Conference 44564, 1661-1669, 2011 | 9 | 2011 |
| Microstructural and hardness modeling: Effect of multiple bead deposition in temper bead welding technique AS Aloraier, S Joshi, M Asadi, RG Alena, JA Goldak International Journal of Energy & Technology 2 (16), 1-11, 2010 | 9 | 2010 |
| Modelling of a stud arc welding joint for temperature field, Microstructure Evolution and residual stress H Soltanzadeh, J Hildebrand, M Kraus, M Asadi Pressure Vessels and Piping Conference 50435, V06BT06A002, 2016 | 7 | 2016 |
| Optimizing temper bead welding by computational weld mechanics and design of experiment matrix M Asadi, C Bayley, J Goldak Journal of Pressure Vessel Technology 135 (3), 031401, 2013 | 7 | 2013 |
| A direct-search computational weld mechanics optimization using least-square approximation M Asadi, JA Goldak Pressure Vessels and Piping Conference 44564, 455-464, 2011 | 7 | 2011 |
| Challenges in verification of cwm software to compute residual stress and distortion in welds J Goldak, M Asadi Pressure Vessels and Piping Conference 49224, 979-987, 2010 | 7 | 2010 |
| A Designer-Driven Welding Simulation Analysis to Define the Best Weld Sequence for Panel Structures M Asadi, M Tanbakuei Kashani, M Mohseni, M Smith Pressure Vessels and Piping Conference 51685, V06BT06A079, 2018 | 5 | 2018 |
| Welding distortion can be mitigated if welding current and traveling speed vary optimized along a weld path M Asadi, J Goldak, A Weck Pressure Vessels and Piping Conference 46049, V06BT06A058, 2014 | 5 | 2014 |
| Computational weld mechanics (CWM) framework for exploring parametric design space to manage weld optimization M Asadi Carleton University, 2011 | 5 | 2011 |
| Machine-learning-enabled digital twin of welded structures for rapid weld sequence design M Asadi, M Mohseni, M Tanbakuei, MF Kashani, M Smith 74th IIW on-line Assembly and International Conference, 2021 | 4 | 2021 |