| Low-cycle fatigue behaviors of a new type of 10% Cr martensitic steel and welded joint with Ni-based weld metal Q Zhang, J Zhang, P Zhao, Y Huang, Z Yu, X Fang International Journal of Fatigue 88, 78-87, 2016 | 50 | 2016 |
| Study on the fretting wear performance and mechanism of GH4169 superalloy after various laser shock peening treatments X Fang, J Gong, Y Yu, S Yu, L Zhou, Z Zhang, Z Cai Optics & Laser Technology 170, 110301, 2024 | 30 | 2024 |
| Estimation of low failure probability based on active learning Kriging model with a concentric ring approaching strategy X Yang, Y Liu, X Fang, C Mi Structural and Multidisciplinary Optimization 58, 1175-1186, 2018 | 30 | 2018 |
| Study on fatigue failure mechanism at various temperatures of a high-speed railway wheel steel XY Fang, YX Zhao, HW Liu Materials Science and Engineering: A 696, 299-314, 2017 | 27 | 2017 |
| Investigation on the effects of microstructure on the impact and fracture toughness of a C–Mn steel with various microstructures R Cao, G Li, XY Fang, J Song, JH Chen Materials Science and Engineering: A 564, 509-524, 2013 | 27 | 2013 |
| Comparison of surface integrity of GH4169 superalloy after high-energy, low-energy, and femtosecond laser shock peening Y Yu, J Gong, X Fang, L Zhou, W He, L Zhou, Z Cai Vacuum 208, 111740, 2023 | 24 | 2023 |
| Influence of welding residual stress on subsurface fatigue crack propagation of rail XY Fang, HN Zhang, DW Ma, ZJ Wu, W Huang Engineering Fracture Mechanics 271, 108642, 2022 | 22 | 2022 |
| Evaluation of temperature‐sensitive fatigue crack propagation of a high‐speed railway wheel rim material XY Fang, ZB Cai, JG Wang, XF Yang Fatigue & fracture of engineering materials & structures 42 (8), 1815-1825, 2019 | 20 | 2019 |
| Effect of underfill defects on distortion and tensile properties of Ti-2Al-1.5 Mn welded joint by pulsed laser beam welding X Fang, J Zhang The International Journal of Advanced Manufacturing Technology 74, 699-705, 2014 | 20 | 2014 |
| Micromechanism of cleavage fracture at the lower shelf transition temperatures of a C–Mn steel JH Chen, G Li, R Cao, XY Fang Materials Science and Engineering: A 527 (18-19), 5044-5054, 2010 | 19 | 2010 |
| Reducing the underfill rate of pulsed laser welding of titanium alloy through the application of a transversal pre-extrusion load X Fang, H Liu, J Zhang Journal of Materials Processing Technology 220, 124-134, 2015 | 16 | 2015 |
| Influence of initial crack on fatigue crack propagation with mixed mode in U71Mn rail subsurface XY Fang, HN Zhang, DW Ma Engineering Failure Analysis 136, 106220, 2022 | 14 | 2022 |
| Effects of temperature on fatigue cracks initiation and propagation for a high-speed railway wheel rim steel XY Fang, W Huang, XF Yang, JG Wang Engineering Failure Analysis 109, 104376, 2020 | 14 | 2020 |
| Microstructure and mechanical properties of pulsed laser beam welded Ti-2Al-1.5 Mn titanium alloy joints X Fang, H Liu, J Zhang Journal of materials engineering and performance 23, 1973-1980, 2014 | 14 | 2014 |
| Effects of microstructure and concavity on damage behavior of laser beam welded Ti-2Al-1.5 Mn titanium alloy joints X Fang, J Zhang The International Journal of Advanced Manufacturing Technology 79, 1557-1568, 2015 | 13 | 2015 |
| Research on fretting regime transition of DD6 single-crystal superalloy via femtosecond laser-induced asperity and hardened layer Y Yu, L Zhou, M Li, Z Cai, S Luo, W He, X Fang Applied Surface Science 610, 155392, 2023 | 11 | 2023 |
| Improvement in fretting fatigue life of GH4169 dovetail joint component by bonded solid lubricant coating at 500℃ Z Wang, T Chen, J Gong, Y Zheng, F Niu, Z Wang, J Wang, X Fang, Z Cai Tribology International 193, 109415, 2024 | 8 | 2024 |
| Effect of coating thickness on interfacial adhesion and mechanical properties of Cr-coated zircaloy Z Teng, C Huan, Y YUE, X FANG, R ZHANG, GAO Xiong, Z CAI Transactions of Nonferrous Metals Society of China 33 (9), 2672-2686, 2023 | 8 | 2023 |
| Machine learning assisted materials design of high-speed railway wheel with better fatigue performance XY Fang, JE Gong, F Zhang, HN Zhang, JH Wu Engineering Fracture Mechanics 292, 109586, 2023 | 7 | 2023 |
| Microstructural evolution and mechanical properties in laser beam welds of Ti–2Al–1.5 Mn titanium alloy with transversal pre-extrusion load XY Fang, JX Zhang The International Journal of Advanced Manufacturing Technology 85, 337-343, 2016 | 5 | 2016 |
