Подписаться
Giangiacomo Minak
Giangiacomo Minak
Professore Associato di Progettazione Meccanica e Costruzione di Macchine, Alma Mater Studiorum
Подтвержден адрес электронной почты в домене unibo.it
Название
Процитировано
Процитировано
Год
Effect of friction stir welding on microstructure, tensile and fatigue properties of the AA7005/10 vol.% Al2O3p composite
L Ceschini, I Boromei, G Minak, A Morri, F Tarterini
Composites science and technology 67 (3-4), 605-615, 2007
3292007
Low velocity impact and compression after impact tests on thin carbon/epoxy laminates
D Ghelli, G Minak
Composites Part B: Engineering 42 (7), 2067-2079, 2011
2512011
Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics
MT Dehkordi, H Nosraty, MM Shokrieh, G Minak, D Ghelli
Materials & Design 31 (8), 3835-3844, 2010
2312010
Hydroelasticity in water-entry problems: Comparison between experimental and SPH results
R Panciroli, S Abrate, G Minak, A Zucchelli
Composite Structures 94 (2), 532-539, 2012
2282012
Impact and post-impact damage characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion
R Petrucci, C Santulli, D Puglia, E Nisini, F Sarasini, J Tirillo, L Torre, ...
Composites Part B: Engineering 69, 507-515, 2015
1832015
Tensile and fatigue properties of the AA6061/20 vol% Al2O3p and AA7005/10 vol% Al2O3p composites
L Ceschini, G Minak, A Morri
Composites Science and Technology 66 (2), 333-342, 2006
1812006
Influence of electrospun Nylon 6, 6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates
R Palazzetti, A Zucchelli, C Gualandi, ML Focarete, L Donati, G Minak, ...
Composite structures 94 (2), 571-579, 2012
1702012
The effect of interleaved composite nanofibrous mats on delamination behavior of polymeric composite materials
H Saghafi, A Zucchelli, R Palazzetti, G Minak
Composite Structures 109, 41-47, 2014
1632014
The influence of hybridization on impact damage behavior and residual compression strength of intraply basalt/nylon hybrid composites
MT Dehkordi, H Nosraty, MM Shokrieh, G Minak, D Ghelli
Materials & Design 43, 283-290, 2013
1602013
Microstructure, tensile and fatigue properties of AA6061/20 vol.% Al2O3p friction stir welded joints
L Ceschini, I Boromei, G Minak, A Morri, F Tarterini
Composites Part A: Applied Science and Manufacturing 38 (4), 1200-1210, 2007
1582007
Correlation of acoustic emission with finite element predicted damages in open-hole tensile laminated composites
R Mohammadi, MA Najafabadi, M Saeedifar, J Yousefi, G Minak
Composites Part B: Engineering 108, 427-435, 2017
1502017
Standard characterization for mechanical properties of photopolymer resins for rapid prototyping
C Fragassa, G Minak
1st Symposium on Multidisciplinary Studies of Design in Mechanical …, 2008
1492008
An integrated approach based on acoustic emission and mechanical information to evaluate the delamination fracture toughness at mode I in composite laminate
AR Oskouei, A Zucchelli, M Ahmadi, G Minak
Materials & Design 32 (3), 1444-1455, 2011
1352011
Recovery of carbon fibers from cured and uncured carbon fiber reinforced composites wastes and their use as feedstock for a new composite production
L Giorgini, T Benelli, L Mazzocchetti, C Leonardi, G Zattini, G Minak, ...
Polymer composites 36 (6), 1084-1095, 2015
1242015
Delamination evaluation of composite laminates with different interface fiber orientations using acoustic emission features and micro visualization
M Nikbakht, J Yousefi, H Hosseini-Toudeshky, G Minak
Composites Part B: Engineering 113, 185-196, 2017
1202017
Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites
G Minak, L Ceschini, I Boromei, M Ponte
International Journal of Fatigue 32 (1), 218-226, 2010
1182010
Forging of the AA2618/20 vol.% Al2O3p composite: Effects on microstructure and tensile properties
L Ceschini, G Minak, A Morri
Composites Science and Technology 69 (11-12), 1783-1789, 2009
1092009
Mechanical behaviour of jute cloth/wool felts hybrid laminates
C Santulli, F Sarasini, J Tirillò, T Valente, M Valente, AP Caruso, ...
Materials & Design 50, 309-321, 2013
1052013
Fabrication, process simulation and testing of a thick CFRP component using the RTM process
E Poodts, G Minak, L Mazzocchetti, L Giorgini
Composites Part B: Engineering 56, 673-680, 2014
1042014
Analysis of damage mechanisms in drilling of composite materials by acoustic emission
NZ Karimi, G Minak, P Kianfar
Composite Structures 131, 107-114, 2015
1032015
В данный момент система не может выполнить эту операцию. Повторите попытку позднее.
Статьи 1–20