Dr. Sudip Kumar Samanta

Citeras av

	Alla	Sedan 2020
Citat	1131	779
h-index	19	15
i10-index	43	32

240

120

180

2011201220132014201520162017201820192020202120222023202420257 8 17 46 75 43 33 46 67 65 102 130 228 213 40

Offentlig åtkomst

Visa alla

30 artiklar

10 artiklar

tillgänglig

inte tillgänglig

Enligt krav från finansiärer

Medförfattare

Prosenjit Das, PhDAssistant Professor, Indian Institute of Science BangaloreVerifierad e-postadress på iisc.ac.in
Aditya Kumar LoharCSIR-CMERIVerifierad e-postadress på cmeri.res.in
Pradip DuttaProfessor of Mechanical Engineering, Indian Institute of ScienceVerifierad e-postadress på iisc.ac.in
Dr. Himadri RoySenior Principal Scientist, CSIR-Central Mechanical Engineering Research InstituteVerifierad e-postadress på cmeri.res.in
Himadri ChattopadhyayProfessor, Dept of Mechanical Engg., JADAVPUR UNIVERSITYVerifierad e-postadress på jadavpuruniversity.in
Dipankar ChatterjeeSenior Principal Scientist & Professor (@ AcSIR), CSIR-CMERIVerifierad e-postadress på cmeri.res.in
Sk Tanbir IslamAssistant ProfessorVerifierad e-postadress på gkcem.ac.in
Piyush PantPh.D. Jadavpur University, KolkataVerifierad e-postadress på ntu.edu.sg
Dr. Tishta dasPost doctoral fellow at IIT BombayVerifierad e-postadress på acsir.res.in
Dr. Manidipto Mukherjee, AMIE, MIIWPr. Scientist, AMRG, CSIR-CMERI, Durgapur 713209, West Bengal, IndiaVerifierad e-postadress på cmeri.res.in
Santanu DasProfessor and Former Head of Mechanical Engineering Department, Kalyani Government EngineeringVerifierad e-postadress på kgec.edu.in
Vijay DesaiProfessor of Mechanical Engineering, NITK SurathkalVerifierad e-postadress på nitk.ac.in
Dr.Nilrudra MandalSr. Principal Scientist, Coatings & Surface Engineering Group, CSIR-CMERIVerifierad e-postadress på cmeri.res.in
Shikha Ambastha, PhDScientist, CSIRVerifierad e-postadress på iap.iisc.ernet.in
Dr.Goutam SutradharProfessor, DirectorVerifierad e-postadress på nitmanipur.ac.in
Supriya BeraAssociate ProfessorVerifierad e-postadress på mme.nitdgp.ac.in
TITAS NANDIProfessorVerifierad e-postadress på jadavpuruniversity.in
Diya MukherjeeRMIT University, DST-INSPIRE-Senior Research Fellow, AcSIR, CSIR-CMERI, DurgapurVerifierad e-postadress på student.rmit.edu.au
Balaji ChandrakanthSenior Scientist, CSIR-CMERIVerifierad e-postadress på cmeri.res.in
Krishna DuttaAssociate Professor, Department of Metallurgical and Materials Engineering, National Institute ofVerifierad e-postadress på nitrkl.ac.in

Följ

Dr. Sudip Kumar Samanta

Chief Scientist, Foundry, CSIR-CMERI Durgapur

Verifierad e-postadress på cmeri.res.in - Startsida

Near Net Shape Manufacturing and Solidification Simulation


Titel Sortera efter citat Sortera efter år Sortera efter titel	Citeras av Citeras av	År
Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis P Das, SK Samanta, R Das, P Dutta Measurement 55, 605-615, 2014	67	2014
A comparative assessment of crystallite size and lattice strain in differently cast A356 aluminium alloy SK Mishra, H Roy, AK Lohar, SK Samanta, S Tiwari, K Dutta IOP Conference Series: Materials Science and Engineering 75 (1), 012001, 2015	64	2015
Microstructural evolution of A356 Al alloy during flow along a cooling slope P Das, SK Samanta, BRK Venkatpathi, H Chattopadhyay, P Dutta Transactions of the Indian Institute of Metals 65, 669-672, 2012	52	2012
Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy P Das, SK Samanta, H Chattopadhyay, P Dutta 金属学报英文版 25 (5), 329-339, 2012	52*	2012
Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope P Das, SK Samanta, H Chattopadhyay, BB Sharma, P Dutta Materials Science and Technology 29 (1), 83-92, 2013	48	2013
Studies on die filling of A356 Al alloy and development of a steering knuckle component using rheo pressure die casting system P Das, B Bhuniya, SK Samanta, P Dutta Journal of Materials Processing Technology 271, 293-311, 2019	42	2019
Microstructure evolution and rheological behavior of cooling slope processed Al-Si-Cu-Fe alloy slurry P Das, SK Samanta, S Bera, P Dutta Metallurgical and Materials Transactions A 47, 2243-2256, 2016	36	2016
A numerical study of solidification in powder injection molding process SK Samanta, H Chattopadhyay, B Pustal, R Berger, MM Godkhindi, ... International journal of heat and mass transfer 51 (3-4), 672-682, 2008	35	2008
Rheological behavior of Al-7Si-0.3 Mg alloy at mushy state P Das, SK Samanta, P Dutta Metallurgical and Materials Transactions B 46, 1302-1313, 2015	34	2015
Statistical modelling and optimization of clad characteristics in laser metal deposition of austenitic stainless steel P Pant, D Chatterjee, T Nandi, SK Samanta, AK Lohar, A Changdar Journal of the Brazilian Society of Mechanical Sciences and Engineering 41, 1-10, 2019	33	2019
A bottom-up approach to experimentally investigate the deposition of austenitic stainless steel in laser direct metal deposition system P Pant, D Chatterjee, SK Samanta, T Nandi, AK Lohar Journal of the Brazilian Society of Mechanical Sciences and Engineering 42, 1-10, 2020	32	2020
Semisolid processing of A380 Al alloy using cooling slope P Das, M Kumar, SK Samanta, P Dutta, D Ghosh Materials and Manufacturing Processes 29 (4), 422-428, 2014	32	2014
Study of microstructure evolution during semi-solid processing of an in-situ Al alloy composite S Kumar, P Das, SK Tiwari, MK Mondal, S Bera, H Roy, SK Samanta Materials and Manufacturing Processes 30 (3), 356-366, 2015	30	2015
Mechanical properties and tensile fracture mechanism of rheocast A356 Al alloy using cooling slope P Das, SK Samanta, T Ray, BRK Venkatpathi Advanced Materials Research 585, 354-358, 2012	30	2012
A reliable and cost effective approach for radiographic monitoring in nutritional rickets D Chatterjee, V Gupta, V Sharma, B Sinha, S Samanta The British Journal of Radiology 87 (1036), 20130648, 2014	28	2014
Thermo-physical characterization of binder and feedstock for single and multiphase flow of PIM 316L feedstock SK Samanta, H Chattopadhyay, MM Godkhindi Journal of Materials Processing Technology 211 (12), 2114-2122, 2011	27	2011
Optimization of processing parameters of cooling slope process for semi-solid casting of ADC 12 Al alloy SK Gautam, N Mandal, H Roy, AK Lohar, SK Samanta, G Sutradhar Journal of the Brazilian Society of Mechanical Sciences and Engineering 40, 1-15, 2018	25	2018
Rheological characterization of semi-solid A356 aluminium alloy P Das, SK Samanta, H Chattopadhyay, P Dutta, N Barman Solid State Phenomena 192, 329-334, 2013	22	2013
Fabrication of stainless steel based composite by metal injection moulding CV Nayak, MR Ramesh, V Desai, SK Samanta Materials Today: Proceedings 5 (2), 6805-6814, 2018	19	2018
Review of accelerated cooling of steel plate J Lee, S Samanta, M Steeper Ironmaking & Steelmaking 42 (4), 268-273, 2015	19	2015

Systemet kan inte utföra åtgärden just nu. Försök igen senare.

Artiklar 1–20

Citat per år

Dubblettcitat

Sammanfogade citat

Lägg till medförfattareMedförfattare

Följ

Citeras av

Medförfattare