ติดตาม
Shamsu Tukur Auwal
Shamsu Tukur Auwal
Department of Mechanical Engineering, Kano University of Science and Technology, Wudil
ยืนยันอีเมลแล้วที่ kustwudil.edu.ng
ชื่อ
อ้างโดย
อ้างโดย
ปี
A review on laser beam welding of titanium alloys
ST Auwal, S Ramesh, F Yusof, SM Manladan
The international Journal of advanced manufacturing technology 97, 1071-1098, 2018
1772018
A review on laser beam welding of copper alloys
ST Auwal, S Ramesh, F Yusof, SM Manladan
The International Journal of Advanced Manufacturing Technology 96, 475-490, 2018
1272018
Effect of heat treatment temperature on mechanical properties of the AISI 304 stainless steel
SA Tukur, MS Dambatta, A Ahmed, NM Mu’az
International Journal of Innovative Research in Science, Engineering and …, 2014
542014
Effect of tempering temperature on mechanical properties of medium carbon steel
SA Tukur, MM Usman, I Muhammad, NA Sulaiman
International Journal of Engineering Trends and Technology 9 (15), 798-800, 2014
412014
Influence of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti lap joints
ST Auwal, S Ramesh, Z Zhang, J Liu, C Tan, SM Manladan, F Yusof, ...
Journal of Manufacturing Processes 37, 251-265, 2019
222019
Effect of copper-nickel interlayer thickness on laser welding-brazing of Mg/Ti alloy
ST Auwal, S Ramesh, Z Zhang, F Yusof, J Liu, C Tan, SM Manladan, ...
Optics & Laser Technology 115, 149-159, 2019
172019
Recent developments and challenges in welding of magnesium to titanium alloys
ST Auwal, S Ramesh, C Tan, Z Zhang, X Zhao, SM Manladan
Adv. Mater. Res 8 (1), 47-73, 2019
92019
Comparative study on characteristics of laser welded-brazed AZ31/Ti-6Al-4V lap joints with and without coatings
ST Auwal, S Ramesh, F Yusof, CW Tan, ZQ Zhang, XY Zhao, ...
The International Journal of Advanced Manufacturing Technology 101, 1023-1040, 2019
82019
Challenges and advances in welding and joining magnesium alloy to steel
ST Auwal, MS Dambatta, S Ramesh, T Caiwang
Engineering Principles-Welding and Residual Stresses, 2022
32022
Design of self-erecting tower for a wind turbine
A Ibrahim, IS Diso, ST Auwal, MA Ibrahim, MS Dambatta, S Ramesh
Int. J. Eng. Res. Technol. 6 (12), 63-82, 2020
22020
A model study for the electric pulse frequency effects on the solidification behavior of Al-5% Сu alloy
Q Jingang, L Yang, SA Tukur
Intern. Journal of Scientific & Technology Research 3 (9), 267-274, 2014
22014
Energy Cost Characteristics of a Micro-Wind Power System Based on Different Capacity Factor: A Case Study of Locations in Nigeria
BI Kunya, Y Alhassan, ST Auwal, M Tambaya, D Kurniawan, S Ramesh
Proceeding of 5th International Conference on Advances in Manufacturing and …, 2023
12023
Dynamic mechanical thermal analysis of PTFE based composites
MA Ibrahim, H Çamur, MA Savaş, AK Sabo, SA Tukur, AY Gidado, ...
AIP Conference Proceedings 2643 (1), 2023
12023
Performance evaluation of car radiator using nano fluids
AS Ahmad, B Abdullahi, ST Auwal, S Ramesh, N Jibrin
AIP Conference Proceedings 2643 (1), 2023
12023
Effects of Using Rice Husk and Paper Pulp as Organic Binding Agents on Calorific Value of Biomass (Sawdust) Briquettes
NM Mu’az, MS Dambatta, SA Tukur, B Abdullahi, U Abdullahi
2nd National Engineering Conference, ACICON, 1-5, 2016
12016
The Effects of Electric Pulse Modification on Eutectic Al-12.6%Si Alloy
SAT Aliyu Mohammed Aliyu, QI Jin-Gang, LI Yang, Zuofu Zhao
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) 11 (Issue 3 Ver …, 2014
1*2014
Optimization of TIG welding parameters for enhanced mechanical properties of Al 7075 weldments
MS Yahaya, D Kumar, ST Auwal, M Mokoyo, AS Gambo, TA Umar, ...
Kathmandu University Journal of Science Engineering and Technology 18 (2), 2024
2024
Comparative study of life cycle carbon emission from photovoltaic and wind power systems: A case study of Kano
BI Kunya, Y Alhassan, ST Auwal, A Ibrahim, NM Muaz, MA Ibrahim, ...
AIP Conference Proceedings 3161 (1), 2024
2024
Thermal analysis of bayonet tube heat exchangers
D Usman, SB Abubakar, ST Auwal, L Jacqueline
AIP Conference Proceedings 3161 (1), 2024
2024
Computational analysis of car radiator coolant using nano fluids
AS Ahmad, B Abdullahi, ST Auwal, A Ahmed, N Jibrin, A Hussein, ...
AIP Conference Proceedings 3161 (1), 2024
2024
ระบบไม่สามารถดำเนินการได้ในขณะนี้ โปรดลองใหม่อีกครั้งในภายหลัง
บทความ 1–20