| Modeling and predicting of the color changes of wood surface during CO2 laser modification R Li, W Xu, X Wang, C Wang Journal of Cleaner Production 183, 818-823, 2018 | 73 | 2018 |
| Effects of laser parameters on the width of color change area of poplar wood surface during a single irradiation R Li, C He, Y Chen, X Wang European Journal of Wood and Wood Products 79 (5), 1109-1116, 2021 | 41 | 2021 |
| Modeling and optimizing the specific cutting energy of medium density fiberboard during the helical up-milling process R Li, C He, W Xu, X Wang Wood Material Science & Engineering 18 (2), 464-471, 2023 | 38 | 2023 |
| Study of cutting power and power efficiency during straight-tooth cylindrical milling process of particle boards R Li, Q Yao, W Xu, J Li, X Wang Materials 15 (3), 879, 2022 | 32 | 2022 |
| Evaluation and modeling of processability of laser removal technique for bamboo outer layer R Li, C He, X Wang Jom 73 (8), 2423-2430, 2021 | 31 | 2021 |
| Prediction of the Color Variation of Moso Bamboo during CO2 Laser Thermal Modification. R Li, J Chen, XA Wang BioResources 15 (3), 2020 | 31 | 2020 |
| Modeling and predicting the machined surface roughness and milling power in Scot’s pine helical milling process R Li, F Yang, X Wang Machines 10 (5), 331, 2022 | 25 | 2022 |
| Effect of laser irradiation on the surface wettability of poplar wood R Li, L Fang, W Xu, X Xiong, XA Wang Science of Advanced Materials 11 (5), 655-660, 2019 | 23 | 2019 |
| Research on the application status of machine vision technology in furniture manufacturing process R Li, S Zhao, B Yang Applied Sciences 13 (4), 2434, 2023 | 20 | 2023 |
| Investigation of glueline shear strength of pine wood bonded with PVAc by response surface methodology R Li, X Guo, M Ekevad, B Marklund, P Cao BioResources 10 (3), 3831-3838, 2015 | 20 | 2015 |
| Prediction of surface roughness of CO2 laser modified poplar wood via response surface methodology R Li, C He, W Xu, XA Wang Maderas. Ciencia y tecnología 24, 2022 | 18 | 2022 |
| Effects of processing parameters on mass loss and coating properties of poplar plywood during CO2 laser modification R Li, C He, X Wang European Journal of Wood and Wood Products 80 (4), 899-906, 2022 | 17 | 2022 |
| Predicting of cutting force during gypsum fiber composite milling process using response surface methodology R Li, P Cao, S Zhang, W Xu, M Ekevad, X Guo Wood and Fiber Science 49 (4), 453-460, 2017 | 17 | 2017 |
| Experimental and numerical study of moisture-induced stress formation in hexagonal glulam using X-ray computed tomography and finite-element analysis R Li, P Cao, W Xu, M Ekevad, X Wang BioResources 13 (4), 7395-7403, 2018 | 16 | 2018 |
| Pressure, feed rate, and abrasive mass flow rate influence on surface roughness for recombinant bamboo abrasive water jet cutting R Li, M Ekevad, X Guo, P Cao, J Wang, Q Chen, H Xue BioResources 10 (2), 1998-2008, 2015 | 14 | 2015 |
| Optimization of laser cutting parameters for recombinant bamboo based on response surface methodology R Li, X Guo, P Cao, XA Wang Wood research 61 (2), 275-286, 2016 | 12 | 2016 |
| A Novel Sawing Method for Small-Diameter Log R Li, P Cao, X Guo, J Futang, M Ekevad, AX Wang Wood research 60 (2), 293-300, 2015 | 11 | 2015 |
| Optimization for the liquefaction of moso bamboo in phenol using response surface methodology R Li, W Xu, C Wang, S Zhang, W Song Wood and Fiber Science 50 (2), 220-227, 2018 | 10 | 2018 |
| Effects of medium-low temperature hydrothermal treatment on microstructure and dimensional stability of Chinese sweetgum wood C Wang, R Li, C Liu, X Wang Wood Res 64 (1), 97-104, 2019 | 7 | 2019 |
| Effect of pressure, feed rate, and abrasive mass flow rate on water jet cutting efficiency when cutting recombinant bamboo R Li, M Ekevad, X Guo, J Ding, P Cao BioResources 10 (1), 499-509, 2015 | 7 | 2015 |
Xiaodong Alice WangUniversité Lavalยืนยันอีเมลแล้วที่ sbf.ulaval.ca