Amir Hossein Kokabi

Alıntı yapanlar

	Hepsi	2020 yılından bugüne
Alıntılar	9946	4865
h-endeksi	60	39
i10-endeksi	168	127

1100

550

275

825

20082009201020112012201320142015201620172018201920202021202220232024202541 52 77 164 211 247 431 499 560 766 904 1057 960 972 864 925 997 147

Genel erişim

Tümünü görüntüle

1 makale

genel erişime açık olanlar

genel erişime açık olmayanlar

Finansman sağlayan kuruluşun getirdiği zorunluluğa dayalı olarak

Katkıda bulunan yazarlar

Mojtaba MovahediDepartment of Materials Science and Engineering, Sharif University of Technologysharif.edu üzerinde doğrulanmış e-posta adresine sahip
Farzad KhodabakhshiUniversity of Tehranut.ac.ir üzerinde doğrulanmış e-posta adresine sahip
Mohsen KazeminezhadSharif University of Technology, Departement of Materials Science and Engineeringsharif.edu üzerinde doğrulanmış e-posta adresine sahip
Abdolreza (Arash) SimchiProfessor and Humbold Awardee, Fraunhofer Institute IFAMifam.fraunhofer.de üzerinde doğrulanmış e-posta adresine sahip
Ekrami Aliakbarprofessor of materials sciencesharif.edu üzerinde doğrulanmış e-posta adresine sahip
Majid PouranvariDepartment of Materials Science and Engineering, Sharif University of Technologysharif.edu üzerinde doğrulanmış e-posta adresine sahip
Madaah HosseiniProfessor of Materials Science and Engineering, Sharif University of Technologysharif.edu üzerinde doğrulanmış e-posta adresine sahip
Adrian GerlichUniversity of Waterloouwaterloo.ca üzerinde doğrulanmış e-posta adresine sahip
Hamed Jamshidi AvalAssociate Professor of Materials Science and Engineering, Babol Noshirvani University of Technologynit.ac.ir üzerinde doğrulanmış e-posta adresine sahip
Mahmoud Sarkari Khorrami, PhDAssistant Professor of Metallurgy & Materials Engineering, University of Tehranut.ac.ir üzerinde doğrulanmış e-posta adresine sahip
Masood Fakouri HasanabadiUniversity of Albertaualberta.ca üzerinde doğrulanmış e-posta adresine sahip
Babak Shalchi AmirkhizCanmetMATERIALSnrcan-rncan.gc.ca üzerinde doğrulanmış e-posta adresine sahip
Mahdi AziziehAzad Universityiauahvaz.ac.ir üzerinde doğrulanmış e-posta adresine sahip
A. FarzadiAssociate Professor, Department of Materials and Metallurgical Engineering, Amirkabir University ofaut.ac.ir üzerinde doğrulanmış e-posta adresine sahip
Eslam RanjbarnodehAssociate Professor, Materials Science and Engineering, Amirkabir University of Technologyaut.ac.ir üzerinde doğrulanmış e-posta adresine sahip
Amir Hossein BaghdadiDepartment of Mechanical and Manufacturing Engineering, Universiti Kebangsaan Malaysia (UKM)ukm.edu.my üzerinde doğrulanmış e-posta adresine sahip
Mohammad Ali Faghihi SaniSharif University of Technologysharif.edu üzerinde doğrulanmış e-posta adresine sahip
Majid Abbasi (Gharacheh)Coherent Corp.coherent.com üzerinde doğrulanmış e-posta adresine sahip
Mahmoud AbbasiAssociate Prof.; Amirkabir University of Technology, University of Kashanaut.ac.ir üzerinde doğrulanmış e-posta adresine sahip
Ali RoshanghiasSilicon Austria Labs GmbHsilicon-austria.com üzerinde doğrulanmış e-posta adresine sahip

Takip et

Amir Hossein Kokabi

Department of Materials Science and Engineering, Sharif University of Technology

sharif.edu üzerinde doğrulanmış e-posta adresine sahip - Ana Sayfa

Materials Science & Engineering Additive Manufacturing Welding and Joining Physical Metallurgy Brazing and Soldering


Başlık Alıntılara göre sırala Yıla göre sırala Başlığa göre sırala	Alıntı yapanlar Alıntı yapanlar	Yıl
Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing M Azizieh, AH Kokabi, P Abachi Materials & Design 32 (4), 2034-2041, 2011	420	2011
The influence of the ratio of “rotational speed/traverse speed”(ω/v) on mechanical properties of AZ31 friction stir welds MA Gharacheh, AH Kokabi, GH Daneshi, B Shalchi, R Sarrafi International Journal of Machine Tools and Manufacture 46 (15), 1983-1987, 2006	259	2006
Friction and wear performance of copper–graphite surface composites fabricated by friction stir processing (FSP) H Sarmadi, AH Kokabi, SMS Reihani Wear 304 (1-2), 1-12, 2013	222	2013
Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations J Mohammadi, Y Behnamian, A Mostafaei, H Izadi, T Saeid, AH Kokabi, ... Materials Characterization 101, 189-207, 2015	208	2015
Study on microstructure and mechanical characteristics of low-carbon steel and ferritic stainless steel joints MS Khorrami, MA Mostafaei, H Pouraliakbar, AH Kokabi Materials Science and Engineering: A 608, 35-45, 2014	190	2014
Effect of bonding temperature on microstructure development during TLP bonding of a nickel base superalloy M Pouranvari, A Ekrami, AH Kokabi Journal of Alloys and Compounds 469 (1-2), 270-275, 2009	188	2009
Solidification and solid state phenomena during TLP bonding of IN718 superalloy using Ni–Si–B ternary filler alloy M Pouranvari, A Ekrami, AH Kokabi Journal of alloys and compounds 563, 143-149, 2013	166	2013
Microstructure development during transient liquid phase bonding of GTD-111 nickel-based superalloy M Pouranvari, A Ekrami, AH Kokabi Journal of alloys and compounds 461 (1-2), 641-647, 2008	159	2008
Constrained groove pressing of low carbon steel: Nano-structure and mechanical properties F Khodabakhshi, M Kazeminezhad, AH Kokabi Materials Science and Engineering: A 527 (16-17), 4043-4049, 2010	153	2010
Evolution of microstructures and mechanical properties in similar and dissimilar friction stir welding of AA5086 and AA6061 HJ Aval, S Serajzadeh, AH Kokabi Materials Science and Engineering: A 528 (28), 8071-8083, 2011	152	2011
Role of zinc layer in resistance spot welding of aluminium to steel MR Arghavani, M Movahedi, AH Kokabi Materials & Design 102, 106-114, 2016	145	2016
Evaluation of microstructure and mechanical properties in friction stir welded A356+ 15% SiCp cast composite M Amirizad, AH Kokabi, MA Gharacheh, R Sarrafi, B Shalchi, M Azizieh Materials Letters 60 (4), 565-568, 2006	143	2006
Effect of annealing treatment on joint strength of aluminum/steel friction stir lap weld M Movahedi, AH Kokabi, SMS Reihani, WJ Cheng, CJ Wang Materials & Design 44, 487-492, 2013	136	2013
Influence of peak temperature during simulation and real thermal cycles on microstructure and fracture properties of the reheated zones S Moeinifar, AH Kokabi, HRM Hosseini Materials & design 31 (6), 2948-2955, 2010	133	2010
Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding M Movahedi, AH Kokabi, SMS Reihani, H Najafi Science and Technology of Welding and Joining 17 (2), 162-167, 2012	130	2012
Aluminum/steel joints made by an alternative friction stir spot welding process E Fereiduni, M Movahedi, AH Kokabi Journal of materials processing technology 224, 1-10, 2015	124	2015
TLP bonding of cast IN718 nickel based superalloy: process–microstructure–strength characteristics M Pouranvari, A Ekrami, AH Kokabi Materials Science and Engineering: A 568, 76-82, 2013	120	2013
Cryogenic friction-stir processing of ultrafine-grained Al–Mg–TiO2 nanocomposites F Khodabakhshi, AP Gerlich, A Simchi, AH Kokabi Materials Science and Engineering: A 620, 471-482, 2015	115	2015
Microstructure and texture development during friction stir processing of Al–Mg alloy sheets with TiO2 nanoparticles F Khodabakhshi, A Simchi, AH Kokabi, M Nosko, F Simanĉik, P Švec Materials Science and Engineering: A 605, 108-118, 2014	115	2014
Phase-field simulation of weld solidification microstructure in an Al–Cu alloy A Farzadi, M Do-Quang, S Serajzadeh, AH Kokabi, G Amberg Modelling and Simulation in Materials Science and Engineering 16 (6), 065005, 2008	112	2008

Sistem, işlemi şu anda gerçekleştiremiyor. Daha sonra yeniden deneyin.

Makaleler 1–20

Yıllık alıntı sayısı

Mükerrer alıntılar

Birleştirilmiş alıntılar

Katkıda bulunan yazar ekleKatkıda bulunan yazarlar

Takip et

Alıntı yapanlar

Katkıda bulunan yazarlar