Friction surfacing deposition by consumable tools
Friction surfacing is a new variation of friction stir processing for surface property
modification of metallic substrates. There is an increasing body of literature about friction …
modification of metallic substrates. There is an increasing body of literature about friction …
[HTML][HTML] Combined experimental-numerical analysis of A356 aluminum alloy friction surfacing on AA2024 aluminum alloy substrate
This study examined the influence of the rotational speed of an A356 aluminum alloy
consumable rod on thermo-mechanical issues, microstructure, and the wear resistance of …
consumable rod on thermo-mechanical issues, microstructure, and the wear resistance of …
[HTML][HTML] Data-driven and physics-based modelling of process behaviour and deposit geometry for friction surfacing
In the last decades, there has been an increase in the number of successful machine
learning models that have served as a key to identifying and using linkages within the …
learning models that have served as a key to identifying and using linkages within the …
Modeling and experimental investigation on friction surfacing of aluminum alloys
AA5083 and AA5052 alloys were utilized as consumable rod and substrate, respectively, in
Friction Surfacing (FS) process and a three-dimensional finite element software known as …
Friction Surfacing (FS) process and a three-dimensional finite element software known as …
[HTML][HTML] Experimentally established correlation of friction surfacing process temperature and deposit geometry
Z Kallien, L Rath, A Roos, B Klusemann - Surface and Coatings Technology, 2020 - Elsevier
Friction surfacing (FS), a solid-state joining process, is a coating technology for metallic
materials. Friction and plastic deformation enable the deposition of a consumable material …
materials. Friction and plastic deformation enable the deposition of a consumable material …
[HTML][HTML] Combined experimental-numerical analysis of the temperature evolution and distribution during friction surfacing
Z Kallien, B Klusemann - Surface and coatings technology, 2022 - Elsevier
Friction surfacing (FS) is a solid state coating technology for similar and dissimilar metallic
materials. The coating of the substrate with a consumable material is enabled due to …
materials. The coating of the substrate with a consumable material is enabled due to …
Effect of mechtrode rotational speed on friction surfacing of AA2024 on AA1050 substrate
The present work investigated the fabrication of two-layered AA1050-AA2024 material by
friction surfacing process. The effect of rotational speed of a consumable rod was evaluated …
friction surfacing process. The effect of rotational speed of a consumable rod was evaluated …
A novel approach to friction surfacing: experimental analysis of deposition from radial surface of a consumable tool
The friction surfacing technique is an advanced method for creating coatings of various
materials onto the surface of a similar or dissimilar material substrate. In this method, there is …
materials onto the surface of a similar or dissimilar material substrate. In this method, there is …
Effects of pre-heat treatment of the consumable rod on the microstructural and mechanical properties of the friction surfaced Al-Cu-Mg alloy over pure aluminum
In this study, the effects of the traverse speed and the pre-heat treatment of the AA2024
consumable rod on the mechanical and microstructural properties of the friction surfaced …
consumable rod on the mechanical and microstructural properties of the friction surfaced …
Effect of friction surfacing parameters on microstructure and mechanical properties of solid-solutionized AA2024 aluminium alloy cladded on AA1050
The present study aims to investigate the effect of friction surfacing parameters on the
mechanical properties and microstructure of coating fabricated by a solid solutionized …
mechanical properties and microstructure of coating fabricated by a solid solutionized …