A review of phosphorus partition relations for use in basic oxygen steelmaking

PB Drain, BJ Monaghan, G Zhang… - Ironmaking & …, 2017 - journals.sagepub.com
Phosphorus removal in basic oxygen steelmaking is a significant problem for integrated
steelmakers. Phosphorus removal is required due to its deleterious effect on the mechanical …

Effect of Temperature on Dephosphorization of Hot Metal in Double‐Slag Converter Steelmaking Process by High‐Temperature Laboratorial Experiments

W Yang, J Yang, Y Shi, Z Yang, F Gao… - steel research …, 2021 - Wiley Online Library
The influence of temperature on the dephosphorization of hot metal at the low temperature
range of 1300–1450° C with the slag of the low basicity (CaO/SiO2) of about 1.8 is …

A review of multi-phase slag refining for dephosphorization in the steelmaking process

W Lin, S Jiao, K Zhou, J Sun, X Feng, Q Liu - Frontiers in Materials, 2020 - frontiersin.org
Dephosphorization has always been a challenging task in the steelmaking process. In the
traditional studies, CaO-based steelmaking slag was usually treated as a homogeneous …

Effect of basicity on dephosphorization of hot metal with a low basicity slag at 1653 K

W Yang, J Yang, Y Shi, Z Yang, F Gao… - Ironmaking & …, 2021 - journals.sagepub.com
This research aims to investigate the influence of the slag basicity from 1.40 to 1.83 on
dephosphorization of the hot metal with a CaO–FeO–SiO2–MgO–Al2O3 molten slag at the …

The rate of the phosphorous reaction between liquid iron and slag

CP Manning, RJ Fruehan - Metallurgical and materials transactions B, 2013 - Springer
In the current study, the rates of dephosphorization and rephosphorization of liquid iron with
simulated steelmaking slags were investigated at 1873 K (1600° C). The experiments were …

Characterization of protective rust on ancient Indian iron using microprobe analyses

P Dillmann, R Balasubramaniam, G Beranger - Corrosion Science, 2002 - Elsevier
Local compositional and structural information was obtained from an ancient 1500-year-old
Indian iron and its protective scale utilizing microprobe techniques (μXRD and μPIXE) …

Synthesis of a CaO-Fe2O3-SiO2 composite from a dephosphorization slag for adsorption of CO2

ZH Hashim, Y Kuwahara, A Hanaki, AR Mohamed… - Catalysis Today, 2023 - Elsevier
The issue of excess slag waste generated in the iron and steel making industries has
prompted investigations on the use of the slag waste. The objective of this study is to …

A reaction between high Mn–high Al steel and CaO–SiO2-type molten mold flux: reaction mechanism change by high Al content ([pct Al] 0= 5.2) in the steel and …

MS Kim, MS Park, SE Kang, JK Park, YB Kang - ISIJ International, 2018 - jstage.jst.go.jp
A series of laboratory-scale experiments were carried out in order to elucidate the reaction
mechanism between high Mn-high Al steel and CaO–SiO 2-type molten mold flux at 1450 C …

Effect of CaF2 on Phosphorus Refining from Molten Steel by Electric Arc Furnace Slag using Direct Reduced Iron (DRI) as a Raw Material

MK Oh, TS Kim, JH Park - Metallurgical and Materials Transactions B, 2020 - Springer
The effect of CaF 2 addition on dephosphorization reaction between molten steel and
electric arc furnace (EAF) slag using direct reduced iron (DRI) at 1823 K (1550° C) was …

Dephosphorization kinetics between bloated metal droplets and slag containing FeO: the influence of CO bubbles on the mass transfer of phosphorus in the metal

K Gu, N Dogan, KS Coley - Metallurgical and Materials Transactions B, 2017 - Springer
Dephosphorization kinetics of bloated metal droplets was investigated in the temperature
range from 1813 K to 1913 K (1540° C to 1640° C). The experimental results showed that …