Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
Influence of various trace metallic additions and reinforcements on A319 and A356 alloys—a review
In this article, aspects related to A319 (AlSi5Cu3) and A356 (AlSi7Mg) alloy are covered
owing to their prominent role in the automotive and aerospace industries. It is important to …
owing to their prominent role in the automotive and aerospace industries. It is important to …
[HTML][HTML] Dynamic precipitation and dynamic recrystallization behaviors of Mg-Gd-Nd-Zr magnesium alloy during thermal compression deformation
In this paper, the dynamic precipitation and dynamic recrystallization (DRX) behaviors of Mg-
7Gd-2Nd-0.5 Zr (wt.%) alloy during thermal compression were investigated by optical …
7Gd-2Nd-0.5 Zr (wt.%) alloy during thermal compression were investigated by optical …
[HTML][HTML] A new synergy to overcome the strength-ductility trade-off dilemma in Al–Si–Cu alloy by micro-nano-particle complex clusters
The effects of the novel micro-nano-particle clusters (nano-AlN and submicron-TiC particles
doped with B, referred as TiC B) on the microstructure and mechanical properties of the Al …
doped with B, referred as TiC B) on the microstructure and mechanical properties of the Al …
Influence of Mg addition and T6 heat treatment on microstructure, mechanical and tribological properties of Al–12Si–3Cu based alloy
The aim of the present study was to investigate the influence of Mg addition and T6 heat
treatment on microstructure, mechanical and tribological properties of the Al–Si–Cu–Mg …
treatment on microstructure, mechanical and tribological properties of the Al–Si–Cu–Mg …
Microstructure evolution and formation mechanism of CoCrCu1. 2FeNi high entropy alloy during the whole process of semi‐solid billet preparation
J Jiang, M Huang, Y Wang, Y Liu, Y Zhang - Journal of Materials Science & …, 2022 - Elsevier
Dual face-centered cubic (FCC) CoCrCu 1.2 FeNi semi-solid billets were prepared by
semisolid isothermal treatment of wrought high entropy alloy (HEA)(SSITWH) method, and …
semisolid isothermal treatment of wrought high entropy alloy (HEA)(SSITWH) method, and …
Microstructural evolution, dislocation density and tensile properties of Al–6.5 Si–2.1 Cu–0.35 Mg alloy produced by different casting processes
Abstract Al–Si–Cu–Mg foundry alloys are used in casting process technologies. However,
their strength properties remain low due to their microstructural characteristics and porosity …
their strength properties remain low due to their microstructural characteristics and porosity …
Aluminiums for thixoforging and preparatory conditions and parameters necessary before forming: A review
The thixoforging of aluminium alloys has received in recent years an extensive interest for
the manufacture of parts because of its advantages. To choose an aluminium alloy as raw …
the manufacture of parts because of its advantages. To choose an aluminium alloy as raw …
Effect of strain-induced melt activation process and thixoforming on microstructure and mechanical properties of 319 aluminum alloy
The effect of the thixoforming process on the microstructure and mechanical properties of
modified and grain refined 319 aluminum alloy has been investigated. The strain-induced …
modified and grain refined 319 aluminum alloy has been investigated. The strain-induced …
Effect of hot isostatic pressing on the microstructure and properties of magnesium silicide–silicon carbide/aluminum alloy (AlSi7Cu2Mg) composites
W Zhang, Z Wei, H Xu - Advanced Composites and Hybrid Materials, 2022 - Springer
The preparation of aluminum matrix composites by liquid stirring casting is often
accompanied by pore defects, which limit the performance of the composites. The effect of …
accompanied by pore defects, which limit the performance of the composites. The effect of …
Effect of beryllium addition and heat treatment on the microstructure and mechanical properties of the 15% Mg2Si/Al-8Si composite
In the present work, the effect of beryllium (Be) addition (0, 0.3, 0.6, 1.0, 1.5 and 2.0 wt%) on
the microstructure and mechanical properties of the 15% Mg 2 Si/Al-8Si composite has been …
the microstructure and mechanical properties of the 15% Mg 2 Si/Al-8Si composite has been …