Wear behavior at high temperatures of ZrO2-Al2O3 plasma sprayed coatings and an electro-melted AZS refractory

D Franco, H Ageorges, E López, F Vargas - Surface and Coatings …, 2021 - Elsevier
Abstract Two ZrO 2-Al 2 O 3 atmospheric plasma coatings were applied to a pressed and
sintered aluminosilicate refractory brick, which were compared to an electro-melted alumina …

Mechanical behavior of YSZ coatings co-deposited with Al and Ag on AISI 316L via RF sputtering

MM Amado, JJ Olaya, JE Alfonso - Ceramics International, 2021 - Elsevier
This article presents nanohardness, coefficient of friction (COF), and wear of Yttria-stabilized
zirconia coatings (YSZ) deposited on 316L steel substrates and co-deposited with Al and …

Estudio de la estructura y las propiedades mecánicas en un recubrimiento de circona estabilizada con 8% en mol de itria elaborado por proyección térmica por …

FM Hurtado, AG Hernández, MEL Gómez… - Matéria (Rio de …, 2016 - SciELO Brasil
El estudio de recubrimientos nanoestructurados fabricados mediante proyección térmica ha
generado un gran interés en las últimas dos décadas debido a su considerable mejora en …

Microstructural evaluation of YSZ/NiCrAlCo-Y2O3 coatings after isothermal oxidation at 1050° C

AG González-Hernández, H Ageorges… - Journal of Physics …, 2018 - iopscience.iop.org
In this study, the microstructure of the bond coat of the YSZ/NiCrAlCo-Y 2 O 3 systems after
isothermal oxidation was examined. The ceramic top coating (YSZ) and bond coat …

Evaluation of hot corrosion behavior of yttria-stabilized-zirconia coating elaborated by atmospheric plasma spraying

AG González H, FM Hurtado, H Ageorges… - … de Metalurgia y …, 2017 - ve.scielo.org
Evaluation of hot corrosion behavior of yttria-stabilized-zirconia coating elaborated by
atmospheric plasma spraying SciELO - Scientific Electronic Library Online vol.37 número1 …

Thermal properties of zirconia-alumina coatings obtained by thermal spray flame

M Ferrer, F Vargas, CM Moreno - Journal of Physics: Conference …, 2019 - iopscience.iop.org
Thermal spraying makes possible to manufacture coatings of a large number of materials,
including those with a high melting point, such as ceramics. There are different ways of …

Obtaining and characterization of nanostructured coatings of zirconia-alumina-ceria by thermal spray flame

LF Rodríguez, M Ferrer, G Peña - Journal of Physics: Conference …, 2019 - iopscience.iop.org
Zirconia, alumina and ceria powders were agglomerated, by granulator disk, to be used as
raw material in the manufacture of coatings on red clay substrates by flame spray. Three …

[HTML][HTML] Evaluación de la morfología, resistencia al desgaste ya la corrosión de recubrimientos de ZrO2-Al2O3/Ni depositados sobre sustratos de acero al carbono …

MY Ferrer Pacheco, F Vargas Galvis… - … . Revista chilena de …, 2017 - SciELO Chile
The morphology, wear and corrosion resistance of bilayer coatings elaborated by flame
spraying on AISI SAE 1020 substrates are reported. The first layer (bond coat) is a nickel …

[PDF][PDF] Evaluation of morphology, wear and corrosion resistance of ZrO2-Al2O3/Ni coatings deposited on carbon steel substrates with flame spraying

MYF Pacheco, FV Galvis, EV López… - … . Revista chilena de …, 2017 - redalyc.org
The morphology, wear and corrosion resistance of bilayer coatings elaborated by flame
spraying on AISI SAE 1020 substrates are reported. The first layer (bond coat) is a nickel …

[HTML][HTML] Evaluación del comportamiento a la corrosión en sales fundidas de recubrimientos de circona estabilizada con itria elaborados por proyección termica por …

AG González, FM Hurtado, H Ageorges… - … de Metalurgia y …, 2017 - ve.scielo.org
En este trabajo se evaluó el comportamiento a la corrosión en caliente en un ambiente de
sales de un recubrimiento de circona estabilizada con un 7% en peso de itria (YSZ), el cual …