The removal of NOx by catalytic technology at low temperatures (100–300° C) is significant
for flue gas of industry and exhaust gas of diesel engine; however, to develop the low …

Selective catalytic reduction of NOx using NH3 or hydrocarbons (NH3-SCR or HC-SCR) in
oxygen-rich exhaust from diesel engines remains a major challenge in environmental …

Currently, selective catalytic reduction of NO x with NH3 in the presence of SO2 is still
challenging at low temperatures (< 300° C). In this study, enhanced NO x reduction was …

A series of iron–niobium composite oxides for selective catalytic reduction of NO x with NH3
(NH3-SCR) were prepared by coprecipitation with the assistance of CTAB. The obtained …

It is an intractable issue to improve the low-temperature SO2-tolerant selective catalytic
reduction (SCR) of NO x with NH3 because deposited sulfates are difficult to decompose …

Sulfur poisoning is a common problem causing catalyst deactivation during the industrial
catalytic process. However, for selective catalytic reduction of NO x with ammonia (NH3 …

A superior Ce-W-Ti mixed oxide catalyst prepared by a facile homogeneous precipitation
method showed excellent NH3-SCR activity and 100% N2 selectivity with broad operation …

The deposition of WO x species using conventional impregnation method is a very simple
and efficient way to adjust the surface acidity and redox ability of hematite Fe 2 O 3 …

(Fe3− xMnx) 1− δO4 was synthesized using a co-precipitation method and then developed
as a catalyst for the low temperature selective catalytic reduction (SCR) of NO with NH3. The …

Selective catalytic reduction (SCR) of NO with NH3 over manganese substituted iron titanate
catalysts was fully studied. The low temperature SCR activity was greatly enhanced when …