This review focuses on the recent development of iron (Fe)-based amorphous/
nanocrystalline composite coatings, which have attracted much attention due to their …

This paper provides a comprehensive characterisation of HVOF-and HVAF-sprayed Cr 3 C 2–
25 wt.% NiCr hardmetal coatings. One commercial powder composition with two different …

Thermally sprayed tungsten carbide (WC) and chromium carbide (Cr 3 C 2) based hard
metal coatings are commonly applied on component surfaces as corrosion and wear …

The technical advantages and capabilities of the Metco TriplexPro-210 atmospheric plasma
spray system offers the potential to develop a new protective surface to address extreme …

Abstract A novel Cr 3 C 2-WC-NiCoCrMo and commercial Cr 3 C 2-NiCr thermal spray-
grade powders with particle size of− 45+ 15 μm were prepared by an agglomeration and …

The effect of heat treatment (300–950° C) on friction and abrasive wear behaviour of WC-
12Co and Cr 3 C 2–25NiCr coatings was investigated in the present work. The abrasive …

High-velocity oxygen fuel thermal spraying is widely used in industrial production, and
coating hardness and density are closely related to the flight velocity of particles. In this …

Abstract Development of nanostructured high velocity oxy-fuel (HVOF) coatings with low
porosity, high strength and increased wear resistance is still in its infancy. Combining …

To improve the high-temperature oxidation performance of remanufactured coatings, a novel
Cr 3 C 2–NiCrCoMo (NCC) coating with modified multielement alloy adhesive phase was …

Thermal spray chromium carbide-based composites have been widely used industrially
because of their superior oxidation resistance at elevated temperatures compared to other …