Most of the variables measured in scientific investigations or engineering applications
depend, by varying degrees, on temperature. This necessitates the simultaneous …

Flow sensing in hostile environments is of increasing interest for applications in the
automotive, aerospace, and chemical and resource industries. There are thermal and non …

This paper addresses the practical implementation of a wireless sensors network designed
to actualize cyber-physical systems that are dedicated to structural health monitoring …

Today, the sensing devices play an important role for various system automation and
monitoring of different physical and chemical parameters. Nonlinearity is an important long …

The small silicon chip of Schottky diode (0.8× 0.8× 0.4 mm 3) with planar arrangement of
electrodes (chip PSD) as temperature sensor, which functions under the operating …

This article presents a wireless sensing node (SN) part of a wireless sensor network (WSN)
dedicated to the deployment of a cyber–physical system intended for the Structural Health …

In this paper, we present the design and characterization of a low-power low-cost infra-red
emitter based on a tungsten micro-hotplate fabricated in a commercial 1-μm silicon on …

In this work, we demonstrate the usability of a fully-2D-material based device consisting of
MoS 2/WSe 2 heterojunction encapsulated by hBN and contacted by graphene as …

Dielectrophoretic alignment is found to be a simple and efficient method to deposit the
solution prepared ZnO nanowires onto micro hot plate substrates. Due to the strong surface …

Temperature is one of the most fundamental parameters for the characterization of a
physical system. With rapid development of lab-on-a-chip and biology at single cell level, a …