[HTML][HTML] Investigation of the use of textile carbon yarns as sustainable shear reinforcement in concrete beams

SM Abd, IS Mhaimeed, BA Tayeh, HM Najm… - Case Studies in …, 2023 - Elsevier
In recent years, textile reinforcement has been widely researched and used in reinforced
concrete beams, slabs, and thin plates. However, the design for bending is completely …

Bending performance of RC slabs strengthened by CFRP sheets using sprayed UHTCC as bonding layer: Experimental study and theoretical analysis

S Xu, H **e, Q Li, C Hong, J Liu, Q Wang - Engineering Structures, 2023 - Elsevier
Debonding failure is one of the main drawbacks of reinforced concrete (RC) structures
strengthened with externally bonded (EB) fiber reinforced polymer (FRP) systems. Due to …

Prediction of the debonding failure of beams strengthened with FRP through machine learning models

T Hu, H Zhang, J Zhou - Buildings, 2023 - mdpi.com
Plate end (PE) debonding and intermediate crack (IC) debonding are the two main failure
modes of beams strengthened with fiber-reinforced polymer (FRP) in flexure. Therefore, it is …

Mechanical Steel Stitches: An innovative approach for strengthening shear deficiency in undamaged reinforced concrete beams

C Aksoylu, YO Özkılıç, MH Arslan - Buildings, 2022 - mdpi.com
In this study, reinforced concrete beams with insufficient shear capacity were strengthened
on both sides of the beam along the shear openings by a novel approach: Mechanical Steel …

Parameters affecting the behaviour of RC beams strengthened in shear and flexure with various FRP systems

K Sengun, G Arslan - Structures, 2022 - Elsevier
An experimental investigation was carried out on rectangular RC beams strengthened with
FRP in different strengthening forms in shear and flexure. The parameters examined in this …

[HTML][HTML] Machine learning-based model for recognizing the failure modes of FRP-strengthened RC beams in flexure

T Hu, H Zhang, J Zhou - Case Studies in Construction Materials, 2023 - Elsevier
Plate end (PE) debonding and intermediate crack (IC) debonding are the main failure
modes of fiber reinforced polymer (FRP) strengthened reinforced concrete (RC) beams in …

Experimental study and analysis of RC beams shear strengthened with FRP/SMA composites

YJ Xue, WW Wang, J Tian, ZH Wu - Structures, 2023 - Elsevier
In practice, the prestressing is difficult to apply to achieve shear reinforcement of reinforced
concrete (RC) beams due to the limited operating space used for installing mechanical …

Flexural behavior of small-sized I-shaped UHPC beams hybrid reinforced with steel plate and BFRP

Z Dong, Z Liu, J Ji, H Zhu, X Shao, G Wu, Z Yang - Composite Structures, 2023 - Elsevier
A new type of small-sized I-shaped ultra-high-performance concrete (UHPC) beam was
proposed and tested in this paper. The bottom flange of the I-beam was hybrid reinforced …

Shear behavior of pre-damaged RC beams strengthened with UHPFRC-CFRP grid layer

J Shen, H Dai, G Zhou, J Shi - Composite Structures, 2024 - Elsevier
Ultra-high performance fiber reinforced concrete (UHPFRC), incorporating recycled tyre
fibers, and carbon fiber-reinforced polymer (CFRP) grid were utilized to strengthen the pre …

Gep tree-based prediction model for interfacial bond strength of externally bonded frp laminates on grooves with concrete prism

MN Amin, M Iqbal, A Jamal, S Ullah, K Khan… - Polymers, 2022 - mdpi.com
Reinforced concrete structures are subjected to frequent maintenance and repairs due to
steel reinforcement corrosion. Fiber-reinforced polymer (FRP) laminates are widely used for …