Friction-based welding processes are considered as very efficient solid-state metal joining
processes due to soundness of the welded joint with remarkably less energy consumption …

In this work, the AZ31 Mg alloy was subjected to friction stir processing (FSP) by adding CuO
and ZrO 2 particles. The main aim of this study was to increase the tribological and …

The effect of tool traverse speed, offset and rotation direction during dissimilar butt friction stir
welding of Al 5083-H321 and 316L stainless steel plates was studied at constant rotational …

The joining of dissimilar materials is required in many engineering and defense
applications, and the conventional fusion welding often results in defective welds. The …

In this investigation the effect of friction stir welding pin geometry on the microstructure and
mechanical properties of AZ31B magnesium alloy joints is studied. The considered pin …

In the present research, a continuum-based thermo-mechanically coupled rigid-viscoplastic
finite element model is proposed in Deform-3D software to simulate the friction stir welding …

Copper and copper alloys are widely used in various industries due to the excellent
properties, and they are indispensable materials in modern industrial fields. At present …

In this study, for the first time, a fuzzy logic model was used to elucidate and optimize the
friction stir welding of pure copper. For microstructural characterization, light microscopy …

In this study, a thermal model was developed and applied to simulate the friction stir welding
of pure copper plates with the thickness of 2 mm. The different traverse speeds of 100, 200 …

Abstract Travel speeds between 25–300 mm/min and tool rotational speeds of 800 and
1250 rpm were employed for this study. The microstructure, mechanical properties and …