High (or medium)-entropy alloys (H/MEAs) are complex concentrated solid solutions prone
to develop the chemical short-range orders (CSROs), as an indispensable structural …

Chemical short-range order in disordered solid solutions often emerges with specific heat
treatments. Unlike thermally activated ordering, mechanically derived short-range order …

Superplastic deformation of polycrystalline materials is usually accommodated by diffusion-
assisted grain boundary (GB) sliding at high temperatures. Lowering the temperature …

Artificially controlling the solid-state precipitation in aluminum (Al) alloys is an efficient way to
achieve well-performed properties, and the microalloying strategy is the most frequently …

Microstructure and its thermal stability are critical in the development of high-performance Al–
Mg alloys. Here, we attempt to tailor Al 3 (Sc, Zr) precipitates and thus microstructure …

Chemical short-range order (CSRO) in the VCoNi medium-entropy alloy (MEA) processed
by spark plasma sintering (SPS) and hot-rolling (HR) is investigated in this study. Plenty of …

There is considerable interest in magnetic materials which also possess good mechanical
properties. Hence, the effect of Ti/Al ratio on the microstructure, mechanical and magnetic …

The impact of warm-rolling at 773 K to 76% and 90% thickness reduction on the
microstructure and mechanical properties of an equiatomic CrMnFeCoNi high entropy alloy …

In the present research an Al–7.7% Mn–4.9% Zr–3.2% Cu (wt%) alloy was processed by
mechanical alloying (MA) followed by hot press sintering. The microstructure, phase …

In the last three decades, several severe plastic deformation (SPD) procedures have been
developed and applied in materials science to create bulk, ultrafine-grained (UFG) …