Constant power loads and their effects in DC distributed power systems: A review

S Singh, AR Gautam, D Fulwani - Renewable and Sustainable Energy …, 2017‏ - Elsevier
The penetration of dc distributed power systems is increasing rapidly in electric power grids
and other isolated systems to cater demand for cheap, clean, high quality, and uninterrupted …

[HTML][HTML] Constant power loads (cpl) with microgrids: Problem definition, stability analysis and compensation techniques

MK AL-Nussairi, R Bayindir, S Padmanaban… - Energies, 2017‏ - mdpi.com
This paper provides a comprehensive review of the major concepts associated with the
μgrid, such as constant power load (CPL), incremental negative resistance or impedance …

Model predictive control using artificial neural network for power converters

D Wang, ZJ Shen, X Yin, S Tang, X Liu… - IEEE Transactions …, 2021‏ - ieeexplore.ieee.org
There has been an increasing interest in using model predictive control (MPC) for power
electronic applications. However, the exponential increase in computational complexity and …

Large-signal stability improvement of DC-DC converters in DC microgrid

Y Gui, R Han, JM Guerrero, JC Vasquez… - IEEE Transactions …, 2021‏ - ieeexplore.ieee.org
In DC microgrids, constant power loads (CPLs) reduce the effective dam** of the DC-DC
converter and may induce destabilizing effects into the DC-DC converter. To overcome such …

Attack-resilient event-triggered controller design of DC microgrids under DoS attacks

S Hu, P Yuan, D Yue, C Dou, Z Cheng… - IEEE Transactions on …, 2019‏ - ieeexplore.ieee.org
This paper is concerned with the attack-resilient event-triggered controller design problem of
a DC microgrid with multiple nonlinear constant power loads and intermittent denial-of …

Adaptive backstep** sliding mode control for boost converter with constant power load

J Wu, Y Lu - IEEE Access, 2019‏ - ieeexplore.ieee.org
The negative impedance characteristics of a constant power load (CPL) can easily lead to
the instability of the DC bus voltage. To improve the stability of the DC bus voltage, an …

Model predictive control for DC–DC boost converters with reduced-prediction horizon and constant switching frequency

L Cheng, P Acuna, RP Aguilera, J Jiang… - … on Power Electronics, 2017‏ - ieeexplore.ieee.org
The implementation of multistep direct model predictive control (MPC) for dc-dc boost
converters overcomes the well-known issue of nonminimum phase behavior. However, it …

Observer-based backstep** sliding mode control design for microgrids feeding a constant power load

M Alipour, J Zarei, R Razavi-Far, M Saif… - IEEE Transactions …, 2022‏ - ieeexplore.ieee.org
This article deals with the problem of controller design for dc microgrids that feed constant
power loads. To design the proposed controller, first by the use of the exact feedback …

A comprehensive review on constant power loads compensation techniques

E Hossain, R Perez, A Nasiri, S Padmanaban - IEEE access, 2018‏ - ieeexplore.ieee.org
Microgrid, because of its advantages over conventional utility grids, is a prudent approach to
implement renewable resource-based electricity generation. Despite its advantages …

[PDF][PDF] Simple formula for designing the PID controller of a DC-DC buck converter

AS Samosir, T Sutikno, L Mardiyah - International Journal of Power …, 2023‏ - academia.edu
This paper proposes a simple way to design a proportional integral derivative proportional
integral derivative (PID) controller for a DC-DC buck converter. This work concerns getting …