Since the early stages of thermal spray, it has been recognized that the powder composition,
size distribution, shape, mass density, mechanical resistance, components distribution for …

This paper provides a comprehensive characterisation of HVOF-and HVAF-sprayed Cr 3 C 2–
25 wt.% NiCr hardmetal coatings. One commercial powder composition with two different …

Thermally sprayed tungsten carbide (WC) and chromium carbide (Cr 3 C 2) based hard
metal coatings are commonly applied on component surfaces as corrosion and wear …

This study compares three types of WC-10Co4Cr coatings deposited with high-velocity
oxygen fuel (HVOF) and high-velocity air fuel (HVAF) spraying processes. The experimental …

Erosive wear is characterized by successive loss of material from the surface due to the
continuous impact of solid particles. This type of wear affects numerous industries, such as …

Thermally sprayed carbide-based coatings are nowadays extensively considered as an
alternative to electrolytic hard chrome (EHC) coatings to reduce the environmental impact …

Most erosion–oxidation research has been directed at high erodent flux, low impact velocity
conditions typical of fluidised bed conditions. Few works have investigated erosion …

The tribological performance of two Fe–Cr–Ni–Si–B–C (Colferoloy) alloy coatings
manufactured by HVOF thermal spraying was studied by rubber-wheel dry particle abrasion …

Throughout the steel production process, the production hardware is exposed to a broad
range of degradation mechanisms, which ultimately lead to a reduction in product quality …

Abstract Two WC-10Co-4Cr coatings were deposited by high-velocity oxygen fuel (HVOF)
and high-velocity air fuel (HVAF) spray processes, respectively, and their basic mechanical …