Mechanical responses and texture evolution of extruded AZ31 Mg are measured under
uniaxial (tension–compression) and multiaxial (free-end torsion) loadings. Compression …

Two-step tension tests with reloads along different directions are performed on rolled Mg
alloy sheet at room temperature. The experimental yield stress at reloading is systematically …

The effect of constitutive parameters and microstructure on the kinematic and constitutive
responses within grains in a crystal plasticity finite element (CPFE) simulation of a …

Magnesium (Mg) and its alloys offer great potential for reducing vehicular mass and energy
consumption due to their inherently low densities. Historically, widespread applicability has …

Abstract Titanium alloy Ti-5Al-5Mo-5V-3Cr (Ti-5553) is a near beta alloy used in structural
aircraft components because of its excellent mechanical properties. Simulating the …

Two-step loading tests were performed on an AZ31 rolled magnesium alloy sheet with
strong basal texture in the normal direction, and the deformation behavior such as a stress …

Abstract A Mg–Y–Zn alloy composed almost completely of the Long-Period-Stacking-
Ordered (LPSO) phase has been prepared by casting and extrusion to flat bar. An elongated …

The crystallographic texture of metallic materials has a very strong effect on the properties of
the materials. In the present article, we look at the rolling textures of fcc metals and alloys …

A dislocation density-based constitutive model, including effects of microstructure scale and
temperature, was calibrated to predict flow stress of an as-cast AZ91D (Mg-9% Al-1% Zn) …

This study experimentally investigated basal texture initiation and development during cold
rolling, in combination with simulation using a modified visco-plastic self-consistent (VPSC) …