Vanadium-based catalysts have been used for several decades in ammonia-based
selective catalytic reduction (NH3-SCR) processes for reducing NO x emissions from various …

The deactivation and thermal regeneration characteristics of a V2O5-WO3/TiO2 catalyst
modified with titanium isopropoxide (TTIP) were investigated after it was applied for 2,400 h …

Typically, to meet emission regulations, the selective catalytic reduction of NOX with NH3
(NH3-SCR) technology cause NH3 emissions owing to high NH3/NOX ratios to meet …

The NH3-SCR has gained widespread usage due to its exceptional denitrification efficiency.
It achieves high nitrogen oxides (NOx) reduction rates within the temperature range of …

Abstract Selective Catalytic Reduction (SCR) of nitrogen oxides (NOx) is the most effective
way to reduce NO x emissions. However, the most used catalysts for this purpose, V 2 O 5 …

An representative method to reduce CO and NH 3 emissions is selective catalytic oxidation
(SCO). Pt-based catalysts with relatively high resistance to SO 2 compared with other …

The necessity of a broader working temperature range of NH 3-SCR catalysts has been
considered as the need of the hour to tackle air pollutants like NO x and particulate matter …

Modelling of Selective Catalytic Reduction of NO with NH over the Fe-Cu/ZSM-5 Catalyst Page
1 Introduction The selective catalytic reduction (SCR) of NOx with NH3 is currently the most …

Based on the crystalline size of anatase TiO 2, a series of tunable low-temperature shift V 2
O 5-WO 3/TiO 2 (VW/Ti) catalysts for NH 3 selective catalytic reduction (NH 3-SCR) of NOx …

Selective catalytic reduction (SCR) is the most effective method for reducing nitrogen oxide
emissions, but the operating temperature range of V 2 O 5-WO 3/TiO 2 catalysts is narrow …