[HTML][HTML] Review of current regulations, available technologies, and future trends in the green ship** industry
This paper presents a comprehensive review of the current regulations and the various
technologies as well as the decision support methods for each technology the maritime …
technologies as well as the decision support methods for each technology the maritime …
Comparison between empirical and CFD based methods for ship resistance and power prediction
A comparative study is presented on ship hull resistance and propulsion power prediction
using empirical formulations and a Computational Fluid Dynamics (CFD) based solution …
using empirical formulations and a Computational Fluid Dynamics (CFD) based solution …
Effect of trim on container ship resistance at different ship speeds and drafts
The resistance of a container ship at three different Froude numbers and drafts is predicted
using RaNS simulations, demonstrating that the optimum trim angle varies with ship speed …
using RaNS simulations, demonstrating that the optimum trim angle varies with ship speed …
Uncertainty analysis in ship resistance prediction using OpenFOAM
An uncertainty analysis is performed with the open source CFD toolkit, OpenFOAM, for four
different ship models, KCS, DTC, KVLCC2, and JBC. A brief review of the practices in …
different ship models, KCS, DTC, KVLCC2, and JBC. A brief review of the practices in …
Numerical investigation on the effect of trim on ship resistance by RANSE method
This paper presents the results of study effect of trim on resistance of US Navy Combatant
DTMB 5415 model at three different drafts and two Froude numbers by using unsteady …
DTMB 5415 model at three different drafts and two Froude numbers by using unsteady …
Predicting ship frictional resistance due to biofouling using Reynolds-averaged Navier-Stokes simulations
Biofouling reduces the overall hydrodynamic performance of a ship and increases fuel
consumption. Four different fouling resistant coatings were experimentally investigated to …
consumption. Four different fouling resistant coatings were experimentally investigated to …
[HTML][HTML] Estimation of hydrodynamic derivatives of an appended KCS model in open and restricted waters
The paper studies and compares the manoeuvring capabilities of an appended KRISO
Container Ship (KCS) hull model in both open and restricted waters. The KCS hull model …
Container Ship (KCS) hull model in both open and restricted waters. The KCS hull model …
Estimation of hydrodynamic derivatives of a container ship using PMM simulation in OpenFOAM
Static drift, pure sway and pure yaw simulation results are determined for a container ship.
For simulation, open source RANS solver, OpenFOAM was used. The simulation results …
For simulation, open source RANS solver, OpenFOAM was used. The simulation results …
A CFD investigation of the propulsion performance of a low-speed VLCC tanker at different initial trim angles
The backbone of global trade is now the maritime sector. In response to worries about global
warming, a thorough analysis of ship greenhouse gas emissions (GHG) has been …
warming, a thorough analysis of ship greenhouse gas emissions (GHG) has been …
Effect of electric vehicle transportation and carbon capture system on concept Ro-Ro ship stability and EEDI
In terms of their service life, ships may operate for decades. Hence, it depicts the rapid
development of machinery and equipment due to the substantial advancement of …
development of machinery and equipment due to the substantial advancement of …