Fiber laser cutting of CFRP composites and process optimization through response surface methodology
In this experimental study, the effects of major laser process control parameters, such as the
laser power, beam scanning speed and assisting gas flow rate, on cut surface integrity …
laser power, beam scanning speed and assisting gas flow rate, on cut surface integrity …
Magnesium and aluminium alloys dissimilar joining by friction stir welding
V Paradiso, F Rubino, P Carlone, GS Palazzo - Procedia Engineering, 2017 - Elsevier
Multi-material lightweight structures are gaining a great deal of attention in several
industries, in particular where a trade-off between reduced weight, improved performances …
industries, in particular where a trade-off between reduced weight, improved performances …
Laser marking of titanium coating for aerospace applications
In the aerospace industry, in order to ensure the identification and the traceability of the
products, high repeatability, non-invasive and durable marking processes are required …
products, high repeatability, non-invasive and durable marking processes are required …
Influence of process parameters on kerf geometry and surface roughness in Nd: YAG laser cutting of Al 6061T6 alloy sheet
In the present study, fine laser cutting of aluminium alloy 6061-T6 sheets, characterised by
light reflection and heat conductivity, by means of a 150-W multimode lamp pumped Nd …
light reflection and heat conductivity, by means of a 150-W multimode lamp pumped Nd …
Study of the laser remelting of a cold sprayed titanium layer
Abstract Cold Gas Dynamic Spray is an emerging coating technology based on the use of a
supersonic gas jet to accelerate (up to 1000 m/s) and to impact a powder, with size ranging …
supersonic gas jet to accelerate (up to 1000 m/s) and to impact a powder, with size ranging …
Study of the laser marking process of cold sprayed titanium coatings on aluminium substrates
This paper deals with the study of the laser marking process of titanium cold sprayed
coatings on aluminium substrates. Despite several studies regarding the laser marking …
coatings on aluminium substrates. Despite several studies regarding the laser marking …
An investigation on Nd: YAG laser cutting of Al 6061 T6 alloy sheet
In this research work, laser cutting of 6061-T6 aluminium alloy sheets by means of a 150 W
multimode pulsed Nd: YAG laser is investigated. Linear scans using the maximum average …
multimode pulsed Nd: YAG laser is investigated. Linear scans using the maximum average …
Study on the growth of holes in cold spraying via numerical simulation and experimental methods
G Huang, H Wang, X Li, L ** due to its high deposition
efficiency and high-quality bonding characteristic. However, many researchers have noticed …
efficiency and high-quality bonding characteristic. However, many researchers have noticed …
Flow monitoring of microwave pre-heated resin in LCM processes
F Rubino, V Paradiso, P Carlone - AIP conference proceedings, 2017 - pubs.aip.org
Liquid composite molding is manufacturing techniques that involve the injection or infusion
of catalyzed liquid resin into a mold to impregnate a dry fiber preform. The challenges of …
of catalyzed liquid resin into a mold to impregnate a dry fiber preform. The challenges of …
Preparation and Characterization of Core-Shell Al/Al2O3 Composites with Adjusted Structure through Fast Hydrothermal Oxidation of Aluminum
GN Ambaryan, MS Vlaskin… - IOP Conference Series …, 2017 - iopscience.iop.org
A method for preparation of core-shell Al/Al 2 O 3 composites with adjusted structure was
proposed. It was based on two steps: fast hydrothermal partial oxidation of aluminum in …
proposed. It was based on two steps: fast hydrothermal partial oxidation of aluminum in …