Laser Cladding (LC) remanufacturing technology utilizes high-energy, high-density laser
beams to create cladding layers with specialized properties such as wear resistance …

Stellite 6 alloy was subjected to electron beam melting (EBM) processing in this study. The
main phases in the alloy are α-Co, ε-Co, M 23 C 6 (M= Cr, Co, W, etc.), and M 7 C 3 (M= Cr …

As an advanced metal additive manufacturing technology, laser-directed energy deposition
(DED-LB) has attracted a lot of attention in recent years, and is increasingly used in …

The degradation of components resulted from wear is unavoidable in service, which could
be partly solved by applying surface treatment technique. Stellite-6 cobalt-based alloy is …

This study investigates the Inconel 718 alloy coated with NiCrBSi powder using the
ABAQUS software. An accurate conical heat source model is constructed based on the three …

To delve into the effects of process parameters on temperature distribution and cladding-
layer height in laser cladding, as well as the interaction between these two aspects, a …

The laser-based additive manufacturing techniques are widely used for the refurbishment of
worn-out components. The post-processing treatments on additive manufactured parts will …

Abstract 0Cr16Ni5Mo1 super martensitic stainless steel has excellent weldability and is an
economical material with a high life cycle and low cost, but there are few researches and …

To improve the corrosion resistance of alloy structural steel 42CrMo, FeCoNiCrNb0. 5 high
entropy alloy coatings with different numbers of layers are fabricated on 42CrMo steel using …

In this study, tungsten (W) reinforced Inconel 625/Y 2 O 3 composite coatings were
fabricated on Inconel 625 substrates by laser cladding, and the effect of the content of W on …