A gradient nanocrystalline structure with the grain size ranging from nanometer scale at the
treated surface to micrometer scale in the matrix of the bulk coarse-grained TC4 alloy was …

The phase transformation of face-centered cubic (fcc) titanium (Ti), transformed from
hexagonal close-packed (hcp) Ti, in Ti-6Al-4V alloy subjected to ultrasonic surface rolling …

Explosive clads of mild steel (MS) and Ti Grade 2 have been fabricated using different
explosive load ratios (R) of 1.07, 2.01 and 3. Interface microstructure, microhardness …

Carbon nanotubes (CNTs) based composite materials have gained a great deal of attention
from both scientific and industrial community owing to the fascinating properties of CNTs …

The transformation of crystal structure and twinning behavior for Ti–6Al–4V subjected to
severe plastic deformation were studied. The face-centered cubic titanium in Ti–6Al–4V and …

Nitriding, as one of the most widely used surface treatment, was often applied in order to
improve the hardness, fatigue strength as well as wear and corrosion resistance of steels …

A hexagonal close-packed (HCP) to face-centered cubic (FCC) phase transition has been
observed in freestanding alpha-titanium (α-Ti) thin foils under two separate conditions:(1) …

This study investigates the potential of Ti–Ta–Sn alloys for biomedical applications due to
their excellent mechanical properties and biocompatibility, with a particular focus on their …

Grain refinement is a fascinating method to improve both strength and plasticity of metallic
materials. In particular, grains below the micrometer scale can produce significant …

Ball milling of titanium mixed stearic acid yields the formation of the metastable face centred
cubic phase upon sintering and water quenching at 1200° C. Structural transformation was …