This review focuses on lightweight materials (foams, aerogels, cryogels, xerogels) obtained
from lignocellulosic fibres, nanocelluloses, and regenerated celluloses, in which the dried …

Wet foam can be used as a carrier in the manufacturing of lightweight materials based on
natural and man-made fibers and specific additives. Using a foam forming method and …

Aqueous foam can be used as a transfer medium to form lightweight materials from natural
and man-made fibers together with other types of raw materials. This review discusses …

Plastic packaging is causing a serious environmental concern owing to its difficulty in
degrading and micro-particulates' emissions. Develo** biodegradable films has gained …

Cellulose fiber materials suitable for filtering, insulation, protective, and hygiene applications
can be formed using aqueous foam as a carrier phase. The subtle fiber–bubble interaction …

Because some of the critical events during the removal of water before the dryer section on a
paper machine happen very rapidly within enclosed spaces–such as wet-press nips–there …

Three size-fractionated samples of pine beetle-killed wood particles were used to prepare
lightweight insulative foams. The foams were produced by foam-forming an aqueous slurry …

The goal of the 2015 Paris Climate Change Agreement is to limit global warming to 1.5 C. To
reach this goal, climate neutrality must be achieved by mid-century (Paris Agreement 2015) …

Biodegradable cellulosic pulp foams with robustness and water resistance are urgently
needed in nowadays to replace petroleum-based plastic foams for environmental …

Thermoplastic nonwoven composites were produced with the air‐laying and foam‐forming
processes from cellulosic and plastic fibers. The two raw material combinations were (1) …