High-temperature corrosion of critical components such as water walls and superheater
tubes in biomass/waste-fired boilers is a major challenge. A dense and defect-free thermal …

Surface degradation (oxidation/corrosion/erosion) at elevated temperature is encountered
commonly in engineering industries like gas turbines and thermal power plants. M CrAl X …

A Pt modified AlSiY coating was prepared on a Ni-based superalloy DD5 by electroplating
and arc ion plating (AIP). The outer layer of the coating was mainly composed of β-(Ni, Pt) Al …

In the present work, spark plasma sintering (SPS) process was employed to prepare a
nanostructured yttria-stabilized zirconia (8YSZ) coating on a nickel-based superalloy …

Oxide scale formed on HVAF-sprayed NiCoCrAlY coatings and the effect of surface
treatment were investigated by a multi-approach study combining photo-stimulated …

The crystal structure and hardness of thermally grown oxide (TGO) layer formed on a
NiCoCrAlY bond coat in thermal barrier coatings (TBCs) prepared by electron-beam …

The tensile properties of a NiCoCrAlYTa coating manufactured by the Tribomet® process
were examined in a wide range of temperatures representative to turbine in-service …

Electrolytic codeposition is a promising alternative process for fabricating MCrAlY coatings.
The coating process involves two steps, ie, codeposition of CrAlY-based particles and a …

Pt layers of 5 μm in thickness were electroplated before or after depositing NiCoCrAlY
coating by arc ion plating (AIP) aiming for identifying the effect of Pt enriching position on …

Atmospheric plasma spray (APS) process is commonly used in the production of TBCs due
to low cost, and rapid and easy production. Cold gas dynamic spray (CGDS) method is an …