Similar and dissimilar material joints of AISI grade 304 (1.4301) and AISI grade 316 (1.4401)
austenitic stainless steel by solid state diffusion bonding and transient liquid phase (TLP) …

High‐quality joints between titanium alloys and stainless steels have found applications for
nuclear, petrochemical, cryogenic, and aerospace industries due to their relatively low cost …

Bimetallic structures provide a unique solution to achieve site-specific functionalities and
enhanced-property capabilities in engineering systems but suffer from bonding compatibility …

The present study examined the evolution of interfacial microstructure and its effect on the
mechanical properties of Invar/TC4 dissimilar joints by laser welding. The results indicated …

Diffusion bonding was employed to join AISI 321 stainless steel to Ti–6Al–4V titanium alloy
via Cu–Zn foil as the interlayer. The influence of bonding time (30, 45 and 60 min) at 900° C …

In this study, electron beam welding, continuous laser welding, and pulsed laser welding
were used to join Ti–6Al–4V alloy and 17-4PH stainless steel with a 1 mm pure V sheet …

This article provides a comprehensive review of the advancements made in the diffusion
bonding of titanium and its alloys to other advanced materials such as aluminium, stainless …

Modified austenitic stainless steel alloys reinforced with B and B/Ti were fabricated and their
suitability as nuclear reactor control rods was tested. A standard stainless steel AISI 316L …

Nickel-based filler metals are frequently used in high temperature vacuum diffusion brazing
for austenitic stainless-steel joints when components are subjected to high static or dynamic …

Gas tungsten arc welding with a pure Cu filler wire was carried out to join the TC4 titanium
alloy and 304 stainless steel. Filling pure Cu filler wire assisted with regulating welding …