Most industrial alloys contain a matrix phase and dispersed second-phase particles. Several
thermomechanical processing (TMP) steps are usually needed to produce a final product …

Recently, heterostructured (HS) materials, consisting of hard and soft zones with
dramatically different strengths, have been developed and received extensive attention …

The recrystallized grain size and texture in alloys can be controlled via the microchemistry
state during thermomechanical processing. The influence of concurrent precipitation on …

In this study, particle-reinforced aluminum matrix composites (PRAMCs) of 2055 Al–Cu–Li
alloy were prepared with nano-sized TiB 2+ TiC particles, and electron probe microanalyzer …

Eutectic alloys (EAs) with superior fluidity are known to be the easiest to cast into high‐
quality ingots, making them the alloys of choice for making large‐sized structural parts …

Abstract The effects of Al (MnFe) Si dispersoids, with different sizes and number densities,
on the evolution of microstructure and ambient/elevated-temperature mechanical properties …

Single-pass deposits of 6061 aluminum alloy with a single-layer thickness of 4 mm were
fabricated by force-controlled friction-and extrusion-based additive manufacturing. The …

Identifying the defects process in concurrent recrystallization and precipitation during aging
a supersaturated solid solution is essential for understanding their interaction mechanisms …

Abstract (VNbTiTa) 100-x Si x (x= 0, 2.5, 5, 10) refractory high-entropy alloys (RHEAs) are
investigated in this paper. The equal molar VNbTiTa RHEA exhibits a room-temperature …

Complex metallic structures are often manufactured through multi-step forming or casting
processes that induce severe mechanical property variations within the final part. Instead of …