In response to the increased emphasis on reducing carbon emissions, the demand for
lightweight, high-performance structural materials is quickly increasing, and Mg alloys …

Microstructures and tensile properties of a high-pressure die-cast Mg–4Al–2RE–2Ca based
alloy were thoroughly investigated. The results indicate that the combinative addition of Ca …

The microstructure and corrosion resistance of directionally solidified Mg–2 wt.% Zn alloy
with different growth rates were investigated. Optical microscopy observations showed that …

Thermodynamic databases for multi-component aluminum alloys, PanAl, and magnesium
alloys, PanMg, are reviewed and applications are highlighted. Precipitation simulations by …

The effect of increasing the Al concentration to a value between 0.5 and 0.8 wt.% within the
10-μm thick surface layer of a commercial AZ31 alloy sheet manufactured by twin-cast …

The effect of cooling rate on microstructure and microsegregation of three commercially
important magnesium alloys was investigated using Wedge (V‐shaped) castings of AZ91D …

Precipitation strengthening is a crucial method for enhancing the mechanical properties of
steel. The bridgman directional solidification furnace, optical microscope (OM), scanning …

In the present study, the microstructure, mechanical and creep properties of Mg-3.7 Al-3.8
Ca (AC4a), Mg-4.4 Al-4.5 Ca (AC4b) and Mg-4.9 Al-5Ca (AC5) alloys were investigated …

The atmospheric corrosion behavior of alloy AZ91D produced by a semi-solid metal (SSM)
technique and by conventional high pressure die casting (HPDC) was investigated for up to …

The researches on development, application and solidification microstructures of high
performance magnesium (Mg) alloys have received considerable interest recently. The …