A review on polyimide reinforced nanocomposites for mechanical, thermal, and electrical insulation application: Challenges and recommendations for future …
Polyimide nanocomposites have drawn much attention as mechanical, thermal, and
electrical insulation materials due to its superior dielectric, thermal stability, and corona …
electrical insulation materials due to its superior dielectric, thermal stability, and corona …
A review on materials and technologies for organic large‐area electronics
New and innovative applications in the field of electronics are rapidly emerging. Such
applications often require flexible or stretchable substrates, lightweight and transparent …
applications often require flexible or stretchable substrates, lightweight and transparent …
Synthesis and characterization of nanocomposite ultrafiltration membrane (PSF/PVP/SiO2) and performance evaluation for the removal of amoxicillin from aqueous …
The presence of antibiotics in drinking water sources indicates the inefficiency of their
removal using common water treatment process. Removal of these micro-pollutants from …
removal using common water treatment process. Removal of these micro-pollutants from …
Graphene-Embedded Co3O4 Rose-Spheres for Enhanced Performance in Lithium Ion Batteries
M **g, M Zhou, G Li, Z Chen, W Xu… - ACS Applied Materials …, 2017 - ACS Publications
Co3O4 has been widely studied as a promising candidate as an anode material for lithium
ion batteries. However, the huge volume change and structural strain associated with the Li+ …
ion batteries. However, the huge volume change and structural strain associated with the Li+ …
Synthesis and radiation shielding properties of polyimide/Bi2O3 composites
Radiation shielding composites based on polyimide and Bi 2 O 3 were synthesized. Surface
and physical-mechanical properties of polyimide/Bi 2 O 3 composites were studied. Bi 2 O 3 …
and physical-mechanical properties of polyimide/Bi 2 O 3 composites were studied. Bi 2 O 3 …
Remarkable enhancement of thermal stability of epoxy resin through the incorporation of mesoporous silica micro-filler
For the first time, we incorporated mesoporous micro-silica (5 μm, pore size= 50 nm) as a
filler in epoxy resin aiming to enter polymer into the pore of the silica. As expected, the …
filler in epoxy resin aiming to enter polymer into the pore of the silica. As expected, the …
Preparation and characterization of thin film composite reverse osmosis membranes incorporated with hydrophilic SiO2 nanoparticles
This study focuses on the surface modification of the thin-film composite polyamide reverse
osmosis (RO) membranes by silica (SiO 2) nanoparticles. In order to modify RO membranes …
osmosis (RO) membranes by silica (SiO 2) nanoparticles. In order to modify RO membranes …
Polyimide films manufactured using partially wet electrospray deposition
BJ Kingsley, PR Chiarot - ACS Applied Polymer Materials, 2023 - ACS Publications
In electrospray deposition (ESD), solute material is dispersed in a carrier solvent and
atomized into a cloud of microdroplets under the influence of a strong electric potential. The …
atomized into a cloud of microdroplets under the influence of a strong electric potential. The …
Polyolefins and the environment
Polymer science has built a considerable body of knowledge with regards to structure–
property relationships. This knowledge starts with a thorough understanding of the primary …
property relationships. This knowledge starts with a thorough understanding of the primary …
[HTML][HTML] Enhancing rate capability of graphite anodes for lithium-ion batteries by pore-structuring
D Jang, S Suh, H Yoon, J Kim, H Kim, J Baek… - Applied Surface Science …, 2021 - Elsevier
For the development of high-performance lithium-ion batteries (LIBs), numerous studies on 3-
dimensionalized electrode structures have been conducted to improve the ionic diffusion …
dimensionalized electrode structures have been conducted to improve the ionic diffusion …