In recent years considerable attention has been attracted to magnesium because of its light
weight, high specific strength, and ease of recycling. Because of the growing demand for …

Surface engineering of thin films in multiple applications have gained immense attention
due to advancement in nanotechnology, fabrication and synthesis of nanomaterials. Thin …

Zinc (Zn)-based scaffold materials are receiving increasing interest as biodegradable
scaffold materials for biomedical applications due to their low elastic modulus and open …

Magnesium is preferably suited for implant applications since it has good biocompatibility
and suitable elastic modulus close to the natural bone. However, it cannot be used under …

Magnesium (Mg) surface was mechanically burnished and then alloyed with aluminum (Al)
by thermal diffusion. The grain-refinement by surface burnishing significantly facilitated the …

In this study, the multi-walled carbon nanotubes (MWCNTs) reinforced Mg-6Zn matrix
composite was fabricated via powder metallurgy followed with aging treatment, and the …

A nano-featured tantalum coatings with an average thickness of 800 nm and grain size of 50
nm were successfully prepared by Selective Electron Beam Melted (SEBM) Ti6Al4V …

Zinc oxide and multiwall carbon nanotubes (ZnO/MWCNT) nanocomposites thick films were
prepared via sol-gel screen printing procedure and followed by sintering at 550° C. Thus …

Abstract Mg-Ca-TiO 2 (MCT) composite scaffolds loaded with different concentrations of
doxycycline (DC) with a network of interconnected pores with good compressive strength …

Supersonic plasma spray was used to deposit Al-coating on AZ91-alloy. Nano-Ti polymer
was then employed to seal the pores on the as-sprayed Al-coating. The microstructures and …