Post-spray treatments have recently been popular as a means of improving the overall
quality of thermally sprayed coatings, particularly those done using the HVOF technique …

Plasma-sprayed (PS) coatings in industrial or aerospace applications are chosen as a
technique for enhancing the high-temperature oxidation performance of parts operating …

After presenting general facts about Ni-based self-fluxing alloy coatings and describing the
wear and corrosion studies in Part 1, Part 2 of the article deals with the review and …

Employing pretreatment is a pressing need for preparing anticorrosive coatings on carbon
steels. However, conventional pretreatments are usually based on Cr, P and some other …

Wetting behaviors of plasma sprayed Fe, Ni, Cr and their mixture coatings were investigated.
The contact angle of water droplets on the surfaces increases with time when the surfaces …

Abstract In this study, Inconel625+ 30% Al 2 O 3 (IN30AL) blended powders were sprayed
on a commercially used boiler steel ASTM SA210 GrA1 using high-velocity oxy-fuel …

The Ni base alloy (EWAC 1004EN) was used to develop coatings on the mild steel substrate
by flame spraying process. The Ni base alloy powder was modified by adding tungsten …

Nickel-based alloys powders with and without nano-Al2O3 (α-Al2O3) addition (Al2O3-free
and Al2O3-added, respectively) were deposited on Q235A low carbon steel using plasma …

The aim of the present study is to investigate the slurry erosion behavior of nano‐yttria‐
stabilized zirconia (YSZ) reinforced Cr3C2–25NiCr ceramic nanocomposite coatings …

In present paper the influence of the tungsten carbide (WC) particle addition on the
microstructure, microhardness and abrasive wear behaviour of flame sprayed Co–Cr–W–Ni …